[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Paparazzi-devel] INS Subsystem and rotorcraft navigation
From: |
Loic Drumettaz |
Subject: |
[Paparazzi-devel] INS Subsystem and rotorcraft navigation |
Date: |
Tue, 31 Jul 2012 12:12:33 +0200 |
Hi,
I made some test flights using ACCEL_NOISE=20 with HFF. There is no significant improvement in navigation.
Looking at the logs, the telemetry messages HFF and HFF_DBG can be compared to see the result of the filtering. The curves shows that the filtered positions and speeds are never in advance compared to the measured values (I guess measured values are GPS values).
I suppose that with ACCEL_NOISE=20, the accelerometers are filtered too much in the Kalman. This would mean that I need to reduce vibrations on my quadrotor, in order to be able to use ACCEL_NOISE with lower values?
Another question: Is there any navigation option to set heading to the next waypoint in navigation? Or to a specified waypoint?
I noticed the heading navigation mode but only a value of heading can be set, not a waypoint?
Regards
Loïc
- [Paparazzi-devel] INS Subsystem and rotorcraft navigation,
Loic Drumettaz <=