Re: [Paparazzi-devel] Problem flashing STM after update

[Christoph Niemann]

Dear Gareth,

stupid me. I didn't recognize it. I'll try it tomorrow.

Thank you very much

Christoph

2012/6/28 Gareth Roberts <address@hidden>

Hi Christoph,

The default flash mode changed from jtag to standard USB via the bootloader.
You may want to make up a small bridge to put the Lisa into bootloader mode and use the bootloader mode, or to continue using jtag you need to change a firmware file setting (search for esden/luftboot in the archives for more details).

http://paparazzi.enac.fr/wiki/Lisa/M_v20#Using_luftboot

Cheers,
Gareth

On Thu, 28 Jun 2012 11:01:05 +0100, Christoph Niemann <address@hidden> wrote:

Hi,

everybody. Currently I'm trying to flash a Lisa/M v. 1.0 . However there is
a problem doing so.
Using my old git (about 8 Months old:
https://github.com/paparazzi/paparazzi/tree/8034bcb20931358cbd8853f8f51cda04844114eb).
Eberything is fine, I'm able to flash (over the Floss-JTAG). After updating
to revision to v3.9.2_testing-3-g38ebd01-dirty, I get

make[1]: Leaving directory `/home/christoph/paparazzi/aktueller/sw/airborne'
cd sw/airborne; make PAPARAZZI_SRC=/home/christoph/paparazzi/aktueller
PAPARAZZI_HOME=/home/christoph/paparazzi/aktueller TARGET=ap upload
make[1]: Entering directory
`/home/christoph/paparazzi/aktueller/sw/airborne'
Using stm32 mem dfu loader
/usr/bin/python
/home/christoph/paparazzi/aktueller/sw/tools/dfu/stm32_mem.py
/home/christoph/paparazzi/aktueller/var/Quad_LisaM_2/ap/ap.bin

USB Device Firmware Upgrade - Host Utility -- version 1.2
Copyright (C) 2011  Black Sphere Technologies
Copyright (C) 2012  Transition Robotics Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html

No devices found!
make[1]: *** [upload] Fehler 255

Is this something trivial? I don't have a clue :-)

Thanks for your help!

Christoph

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel