Re: [Paparazzi-devel] Problem flashing STM after update

[Gareth Roberts]

Hi Christoph,

The default flash mode changed from jtag to standard USB via the  
bootloader.
You may want to make up a small bridge to put the Lisa into bootloader  
mode and use the bootloader mode, or to continue using jtag you need to  
change a firmware file setting (search for esden/luftboot in the archives  
for more details).

http://paparazzi.enac.fr/wiki/Lisa/M_v20#Using_luftboot

Cheers,
Gareth

On Thu, 28 Jun 2012 11:01:05 +0100, Christoph Niemann  
<address@hidden> wrote:

> Hi,
>
> everybody. Currently I'm trying to flash a Lisa/M v. 1.0 . However there  
> is
> a problem doing so.
> Using my old git (about 8 Months old:
> https://github.com/paparazzi/paparazzi/tree/8034bcb20931358cbd8853f8f51cda04844114eb).
> Eberything is fine, I'm able to flash (over the Floss-JTAG). After  
> updating
> to revision to v3.9.2_testing-3-g38ebd01-dirty, I get
>
> make[1]: Leaving directory  
> `/home/christoph/paparazzi/aktueller/sw/airborne'
> cd sw/airborne; make PAPARAZZI_SRC=/home/christoph/paparazzi/aktueller
> PAPARAZZI_HOME=/home/christoph/paparazzi/aktueller TARGET=ap upload
> make[1]: Entering directory
> `/home/christoph/paparazzi/aktueller/sw/airborne'
> Using stm32 mem dfu loader
> /usr/bin/python
> /home/christoph/paparazzi/aktueller/sw/tools/dfu/stm32_mem.py
> /home/christoph/paparazzi/aktueller/var/Quad_LisaM_2/ap/ap.bin
>
> USB Device Firmware Upgrade - Host Utility -- version 1.2
> Copyright (C) 2011  Black Sphere Technologies
> Copyright (C) 2012  Transition Robotics Inc.
> License GPLv3+: GNU GPL version 3 or later  
> <http://gnu.org/licenses/gpl.html
> >
>
> No devices found!
> make[1]: *** [upload] Fehler 255
>
> Is this something trivial? I don't have a clue :-)
>
> Thanks for your help!
>
> Christoph