paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] problem uploading to tiny v/2.11


From: Árni Þorvaldsson
Subject: Re: [Paparazzi-devel] problem uploading to tiny v/2.11
Date: Wed, 13 Jun 2012 09:31:53 +0000

hi here is the dmesg command

address@hidden:~$ dmesg | tail
[84103.912049] usb 5-1: device descriptor read/64, error -71
[84104.140029] usb 5-1: device descriptor read/64, error -71
[84104.412036] usb 5-1: new full speed USB device using uhci_hcd and address 114
[84104.592038] usb 5-1: device descriptor read/64, error -71
[84104.816049] usb 5-1: device descriptor read/64, error -71
[84105.032043] usb 5-1: new full speed USB device using uhci_hcd and address 115
[84105.440034] usb 5-1: device not accepting address 115, error -71
[84105.552036] usb 5-1: new full speed USB device using uhci_hcd and address 116
[84105.964027] usb 5-1: device not accepting address 116, error -71
[84105.964051] hub 5-0:1.0: unable to enumerate USB device on port 1

regards Arni
________________________________________
Frá: address@hidden address@hidden fyrir hönd Gareth Roberts address@hidden
Sent: 12. júní 2012 15:18
To: address@hidden
Efni: Re: [Paparazzi-devel] problem uploading to tiny v/2.11

Hi Arni,

What does the dmesg command report just after you've plugged it in?

Cheers,
Gareth

On Tue, 12 Jun 2012 15:20:13 +0100, Árni Þorvaldsson <address@hidden>
wrote:

> Hi all, I am working with paparazzi on tiny v/2.11.
> Currently I am having problem uploading. I am using
> airframe: funjet_example
> flight plan:basic
> radio:cockpitSX
> telemetry:default.xml
>
> I plug USB and then power the board.
> I get the error
>
> no USB device
> make[1]: *** [upload] Error 1
> make[1]: Leaving directory `/home/mav/paparazzi/sw/airborne'
> make: *** [ap.upload] Error 2
> make: Leaving directory `/home/mav/paparazzi'
>
> I also noticed that the red and yellow led lights on the board does not
> blink when usb is connected and then the battery. It blinks if I connect
> it only to the battery.
> I was wondering if it's a hardware problem because it used to work
> before.
> Kind regards Arni
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]