|
From: | Eduardo lavratti |
Subject: | Re: [Paparazzi-devel] another fatal crash |
Date: | Mon, 11 Jun 2012 03:45:19 +0000 |
i never change values in flight !
> Date: Sun, 10 Jun 2012 18:58:23 -0600 > From: address@hidden > To: address@hidden > Subject: Re: [Paparazzi-devel] another fatal crash > > Hello, > > I was just wondering about your problems in changing gains while in > flight. We have had issues with changing any settings from the ground > (gains, flight plan blocks, etc), and the reason was due to > incorrectly configured radio modems. What radio modems are you using? > Are they setup correctly? You can always do a ground range check and > try changing some settings that way, and see if the problem still > occurs. > > Thanks, > -Stephen Dwyer > > On Thu, May 31, 2012 at 9:52 PM, GURUGANESH R <address@hidden> wrote: > > Hi all, > > I am also using the latest repository, yesterday I found when i engage > > AUTO2 throttle stops completely. In Manual I could fly well but moment I > > engage AUTO2 throttle gets cut and aircraft starts falling down. Anybody > > please suggest how to rectify this problem? I am also trying to find the > > reason for the throttle cut, but nothing clicked yet. > > > > Another problem I faced was during flight In Auto2 Iam unable to change the > > gains from the Ground control station? When on Ground I tried this exercise > > of changing gains in AUTO2 it works well. Are there any altitude > > limitations? or I should ensure Aircraft is level? or any other settings > > that needs to be done? > > > > Kindly help > > -- > > Thanks and Regards > > R.Guruganesh > > > > On Fri, Jun 1, 2012 at 9:03 AM, Eduardo lavratti <address@hidden> > > wrote: > >> > >> Whell, one more time the ppz fizedwing set throttle to 0 (zero) when i > >> engaged AUTO2 mode. > >> the flywing stalled and crashed. > >> > >> i think fixedwing ppz have a bug in throttle code. > >> i am using airspeed_ets. > >> when i engaged auto2 the altitude is greater than desired. > >> > >> i will search and put a minimul throttle value in the ppz code. > >> > >> _______________________________________________ > >> Paparazzi-devel mailing list > >> address@hidden > >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel > >> > > > > > > > > > > > > _______________________________________________ > > Paparazzi-devel mailing list > > address@hidden > > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel > > > > _______________________________________________ > Paparazzi-devel mailing list > address@hidden > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel |
[Prev in Thread] | Current Thread | [Next in Thread] |