Re: [Paparazzi-devel] another fatal crash (Guruganesh)

[Romney, Jefferson S]

I noticed that in order for the throttle to come on in the takeoff block when 
you switch into auto2, you need to put the throttle on the transmitter up to 
activate it.
________________________________________
From: address@hidden address@hidden on behalf of Gareth Roberts address@hidden
Sent: Friday, June 01, 2012 3:19 AM
To: address@hidden
Subject: Re: [Paparazzi-devel] another fatal crash (Guruganesh)

Hi Guruganesh,

It's possible you've not removed the throttle kill.
If you are using the default flightplan, you need to disable throttle kill
in settings (you can't just switch the block to Standby).

Cheers,
Gareth

On Fri, 01 Jun 2012 04:52:40 +0100, GURUGANESH R <address@hidden>
wrote:

> Hi all,
>    I am also using the latest repository, yesterday I found when i engage
> AUTO2 throttle stops completely. In Manual I could fly well but moment I
> engage AUTO2 throttle gets cut and aircraft starts falling down. Anybody
> please suggest how to rectify this problem? I am also trying to find the
> reason for the throttle cut, but nothing clicked yet.
>
> Another problem I faced was during flight In Auto2 Iam unable to change
> the
> gains from the Ground control station? When on Ground I tried this
> exercise
> of changing gains in AUTO2 it works well. Are there any  altitude
> limitations? or I should ensure Aircraft is level? or any other settings
> that needs to be done?
>
> Kindly help

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel