paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] MD5 Checksum


From: Henri Pierre
Subject: Re: [Paparazzi-devel] MD5 Checksum
Date: Fri, 1 Jun 2012 14:27:43 +0200

ok, so it uses full generated xml conf file.

Thanks
Henri

2012/6/1 Gautier Hattenberger <address@hidden>
sw/tools/gen_aircraft.ml:355

G.


On 01/06/2012 13:29, Henri Pierre wrote:
Can you tell me how (maybe where in the code ?) is it computed ?

2012/6/1 Henri Pierre <address@hidden>
Hi Martin

Ok, thanks for your answer.

Henri


2012/6/1 Martin Mueller <address@hidden>
Hi Henri,

yes, that can happen if you disable the check. It was not so uncommon when the
check was not there, even when flying during a talk given to hundreds of
people... Waypoints and blocks then might have a different position/content and
you get easily confused.
Martin




Henri Pierre <address@hidden> hat am 1. Juni 2012 um 12:05 geschrieben:

> Hello
>
> As far as I understood, a check is done before flying beetween the code in
> uav and the GCS.
> While looking in the message.xml, I found the ALIVE message with md5sum
> field.
>
> I supposed that this message is sent by uavto GCS that controls whether it
> is equal to
> its own.
>
> Does that mean that if GCS does not check this point, the uav may take off
> even with a
> different configuration from the gcs ?
>
> Regards
> Henri

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]