paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Paparazzi Install on OSX Lion


From: Chris Wozny
Subject: Re: [Paparazzi-devel] Paparazzi Install on OSX Lion
Date: Tue, 21 Feb 2012 18:52:44 -0700

Bernie,

The permissions don't seem to be the issue since after adding write
permission to user didn't fix it. I searched for what the 't' was and
this is what came up:

"The ‘d’ stands for directory, for normal files this will be a ‘-’.
Next we have the 3 permissions for owning user (root) ‘rwx’, then the
3 for group (root) ‘rwx’ and then the 3 for other users ‘rwt’. So root
and owner have full permissions (in this case the owner is also root)
but all other users have almost full permissions but cannot modify the
directory itself."

So apparently users can't modify that directory...

It's strange that no one on OSX has seen this issue before since I
think all OSX users will see the RWT permission.

- Woz

On Tue, Feb 21, 2012 at 6:35 PM,  <address@hidden> wrote:
> Hi Chris,
>
> So I'm guessing from that lack of write permissions to /tmp that something
> isn't quite right with the permissions on your Mac...
> I'd run disk utility and check the and fix the permissions as this
> "should" fix the permissions on /tmp to make the directory 0777
> (Actually you'll find that /tmp is a sum link to /private/tmp and this
> directory is the one with the permissions problem.
> ls -la /private/
> ...
> drwxrwxrwt   17 root  wheel   578 22 Feb 12:29 tmp
> ...
>
> If Disk Utility doesn't fix it then a good old "sudo chmod 0777
> /private/tmp" should do the trick.
> I'm not sure what the t is on the end of the permissions so maybe "sudo
> chmod a+wrx /private/tmp" might be better???
>
> You shouldn't have any problems building or running paparazzi as a non
> root user.
>
> Cheers,
> Bernie.
>
>> Thanks Bernard,
>>
>> That did indeed solve that issue, but it uncovered a new one. Now I've
>> got permission errors when trying to make paparazzi:
>>
>> ld: warning: -read_only_relocs cannot be used with x86_64
>> cd sw/supervision; make PAPARAZZI_SRC=/Users/cwozny/paparazzi
>> PAPARAZZI_HOME=/Users/cwozny/paparazzi
>> ocamldep -I ../lib/ocaml *.ml* > .depend
>> grep -v invisible_char paparazzicenter.glade > /tmp/paparazzicenter.glade
>> /bin/sh: /tmp/paparazzicenter.glade: Permission denied
>> make[1]: *** [gtk_pc.ml] Error 1
>> make: *** [center] Error 2
>>
>> Have you seen this before? I then sudo made paparazzi and sudo ran
>> paparazzi and everything seems to work, but I'd rather not give
>> paparazzi su access everytime I have to use it ;)
>>
>> - Chris
>>
>> On Tue, Feb 21, 2012 at 6:02 PM,  <address@hidden> wrote:
>>> Hi Chris,
>>>
>>> I haven't ever seen this.
>>>
>>> When encountering errors of any kind when building my plan of attack is
>>> always
>>> 1) make clean
>>> 2) git pull origin <branch>
>>> 3) make
>>> 4) whatever I was trying to do before...
>>>
>>> This usually fixes the problems.
>>>
>>> When I was building MacPorts I used to also make the approach
>>> 1) make clean
>>> 2) sudo port selfupdate
>>> 3) sudo port upgrade outdated
>>> 4) git pull origin <branch>
>>> 5) make
>>> 6) whatever I was trying to do before...
>>>
>>> Sometimes however step three would spew heaps of errors and so step 3
>>> would become
>>> 3a) sudo port -f uninstall installed
>>> 3b) sudo port clean --all uninstalled
>>> 3c) sudo port install paparazzi-tools
>>>
>>> Now however I just take the binary build as its a much quicker process
>>> and
>>> more stable as I don't have to worry about the moving target that
>>> MacPorts
>>> is.
>>>
>>> Cheers,
>>> Bernie.
>>>
>>>> Have any of the OSX users run into this situation when trying to build
>>>> from source on OSX?
>>>>
>>>> $ make
>>>> cd data/maps; make PAPARAZZI_SRC=/Users/cwozny/paparazzi
>>>> PAPARAZZI_HOME=/Users/cwozny/paparazzi
>>>> DOWNLOAD: google maps version code
>>>> if test ! -e conf/maps.xml; then cp conf/maps.xml.example
>>>> conf/maps.xml;
>>>> fi
>>>> cd sw/lib/ocaml; make PAPARAZZI_SRC=/Users/cwozny/paparazzi
>>>> PAPARAZZI_HOME=/Users/cwozny/paparazzi
>>>> OC fig.ml
>>>> File "fig.ml", line 1, characters 0-1:
>>>> Error: Could not find the .cmi file for interface fig.mli.
>>>> make[1]: *** [fig.cmo] Error 2
>>>> make: *** [lib] Error 2
>>>>
>>>> It's looking for a .cmi file related to fig.mli. I've installed
>>>> paparazzi-tools and have pulled the dev branch from git. The only
>>>> related topic on the mailing list was someone installing on Ubuntu,
>>>> but that was two years ago and was said to be rectified in later
>>>> posts.
>>>>
>>>> - Chris
>>>> _______________________________________________
>>>> Paparazzi-devel mailing list
>>>> address@hidden
>>>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]