Re: [Paparazzi-devel] Lisa/M LED Guide?

[Chris Wozny]

Ahh, perfect.

Are we to configure the LEDs in the makefile
(paparazzi/conf/boards/lisa_m_1.0.makefile) or is this something that
has been abstracted to the airframe configuration XML? Also, if it
should be configured via the makefile, should the fields be 1-4
instead of "none"?

- Chris

On Mon, Jan 23, 2012 at 3:50 PM, Felix Ruess <address@hidden> wrote:
> Hi Chris,
>
> The orange one is the power led, so it's on as soon as the board has power.
> The red one is the sys_time led, so it should blink with 1Hz.
>
> From the top of my head the blue one doesn't indicate anything so far
> (in the master branch).
> The dev branch contains some fixes and improvements for the leds, you
> can configure what the leds should indicate.
> E.g. gps fix, ahrs aligner lock, radio control status, etc.... but the
> orange led is always the power led.
>
> Cheers, Felix
>
> On Mon, Jan 23, 2012 at 11:25 PM, Chris Wozny <address@hidden> wrote:
>> All,
>>
>> Does anyone have a reference guide for what all of the LEDs mean on
>> Lisa/M? I see blue constantly on, red flashing every second, and
>> orange always on. I checked the wiki and the mailing list archive to
>> no avail.
>>
>> - Chris
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



-- 
Chris Wozny
ASUA Safe Ride
Administrative Director
Email: address@hidden
Office: 520-621-7233
Cell: 617-921-5679