[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Affecting LED3 in YAPA2
From: |
Felix Ruess |
Subject: |
Re: [Paparazzi-devel] Affecting LED3 in YAPA2 |
Date: |
Mon, 5 Dec 2011 19:00:05 +0100 |
Hi Imed,
what exactly do you want to use the LED for? Blink when you receive,
or send a message? Or both?
Or do you want to indicate datalink status?
Cheers, Felix
On Sun, Dec 4, 2011 at 7:16 PM, limaiem imed <address@hidden> wrote:
> Hi all,
>
> I would Like to use the 3rd LED on YAPA2 Board for the Xbee Telemetry.
>
> The LED1 is affected to general processor time: -DTIME_LED=1
> The LED2 to the GPS throughout: -DGPS_LED=2
>
> Since the Telemetry is on the serial UART1 port, I searched for strings like
> ($)_LED in the whole code but found nothing related to UART1 port ...
>
> Some one can help ?
>
> Regards,
>
> Imed LIMAIEM
> address@hidden
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
- [Paparazzi-devel] Affecting LED3 in YAPA2, limaiem imed, 2011/12/04
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2,
Felix Ruess <=
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, limaiem imed, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, Felix Ruess, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, limaiem imed, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, Felix Ruess, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, limaiem imed, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, Felix Ruess, 2011/12/05
- Re: [Paparazzi-devel] Affecting LED3 in YAPA2, limaiem imed, 2011/12/05