Re: [Paparazzi-devel] Configuring the gps

[Chris Gough]

Hi Joey,

if the GPS tx line is OK but the rx line is not, then you can get
position but not send configuration changes. Are you sure that's not
the problem?

Chris Gough

On Sat, Aug 27, 2011 at 8:27 AM, Joseph Wagster <address@hidden> wrote:
> Hello,
>
> We somehow got the gps module to pick up satellites through u center.
> However when we change the configuration and then go to configue configue
> save current configuration it does not save after we cycle the power. Also
> the tech support at u blocks told us there is an acknowledge  section and it
> does not light up has he says it would. Other than the com port or the baud
> rate we know are right because we receive the satellites, does anyone have
> any ideas about what we could be doing wrong.
>
> Thank you very much,
> Joey
>
> On Aug 24, 2011 9:50 PM, "Joseph Wagster" <address@hidden> wrote:
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>



-- 
.