paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Problems with Tiny13 and Graupner MC22 digital-ser


From: Prof. Dr.-Ing. Heinrich Warmers
Subject: Re: [Paparazzi-devel] Problems with Tiny13 and Graupner MC22 digital-servos and compile-erros
Date: Thu, 25 Aug 2011 15:29:45 +0200
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; de-DE; rv:1.4) Gecko/20030619 Netscape/7.1 (ax)

Thanks for the information  Hector Garcia de Marina,

have you connected the capacitors in the impulse or vcc wire ?
Regards

Heinrich

Hector Garcia de Marina schrieb:

On Tue, Aug 23, 2011 at 10:39 PM, Eric BAHIER <address@hidden> wrote:
hello,

An possible reason of yours problems, the aswer in your mail

Le 23/08/2011 22:27, Prof. Dr.-Ing. Heinrich Warmers a écrit :
Hello world,

today we have found same reasons for the malfunction:

1. One digital servo (elevator) stop moving  and hang sometimes  by  collection to  receiver  or tiny13 . Connecting to a spectrum 2.4GHz  the servo work without problems.

Propably, your servo have a big current drink, and generaly on numerique servo this curent is drink in very small time, and very big current, this the perfect scheme to fail the small power supply of the tiny.


Hi, I have a similar problem in the past but with other stuff. It was solved attaching two small capacitors (around 0.01uF) in parallel just to commit this kind of transient.

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

reply via email to

[Prev in Thread] Current Thread [Next in Thread]