Re: [Paparazzi-devel] Problems with Tiny13 and Graupner MC22

[Christophe De Wagter]

The Penta Profi is not a good receiver in the presence of noise. E.g. with our 868MHz longrange modems we start getting very significant interference at 100m and at 300m loose control. Other receivers like the one they sell at mikrokopter are far less sensitive to this.

-Christophe 

On Wed, Aug 17, 2011 at 10:17 PM, Prof. Dr.-Ing. Heinrich Warmers <address@hidden> wrote:

Hi,
we are flying the  following configuration:
Graupner MC22  (9 channel impulses),
Profi Penta RC- receiver,
Tiny13,
25A Hype bruschless controller,
3 Hitec digital servos.

In  manual and auto1  mode we lost often and sporadic the control  over the aircraft.
The result is a crash.
It seems that the servos make maximum ways and the neutral setting is wrong.

For a configuration with:
Tworg,
MC16/20 and MC15 (8 channel impulses),
Hitec-RC-reciever and
2 Hitec analog servos
we have never seen a malfunction.

Has someone a idea how we can find the error?
Regards

Heinrich Warmers




_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel