[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] need help for motor controller with booz
From: |
Anish Mohammed |
Subject: |
Re: [Paparazzi-devel] need help for motor controller with booz |
Date: |
Wed, 13 Jul 2011 08:20:59 +0100 |
Wow that is a powerful pentacopter btw folks have tried "hacking"pwm one's to
make them I2C do try rcgroups
Regards
Anish
Anish Mohammed
Twitter: anishmohammed
http://uk.linkedin.com/in/anishmohammed
On 13 Jul 2011, at 06:24, Dong Zhao <address@hidden> wrote:
> Hi,
>
> I brought a booz main board for a five rotor UAV. and things follow:
>
> Motor: Brushless Outrunner Motor 245Kv power160, continuous current 60A and
> max brust curent 78A.
> Speed controller: PHOENIX ICE HV 80 brushless speed controller with max
> volts=50V and max amps=80A.
>
>
> The problem at this moment is booz only accept I2C signal from speed
> controller, but i can't find a I2C controller for this 80A motor.
> Is this controller available? Where can i buy this speed controller?
>
> OR,
>
> If use both motor and speed controller above, how can i convert the PWM from
> speed controller to I2C signal?
>
>
> OR,
>
> If I buy a Lisa/L board instead of the booz board and connect the five
> controllers to the servos section on the Lisa\L board, is this a solution
> for this problem?
> If I use this way, how to program?
>
> Regards
> Dong
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel