my name is arnaud and I'm new to the community
I have the GSC blank problem with the following materials
tiny 2.11
XBEE pro ZB 24
LEA5H
Lucid (10.04)
The modems are configured at Baudrate 9600. I have checked the Pan id (1 for both) and Node identifier (PPRZ_GROUND and PPRZ_AIRBORNE)
I'm sure the modems are working because I tested them with X-CTU terminals on two laptops and what I wrote in one terminal appeared the the other one in both ways.
I have tested with the default tinyFw.xml airframe (in Reorg code) which matches the modems configuration (pprz transparent, B9600). There are no problems in building and uploading.
But when I execute, I don't see any blinking of the LED on Ground Modem and testing with X-CTU after execution, I don't receive anything from airborne modem. And the GCS is blank.
I suppose the telemetry (ie messages emitted by the airborne module) doesn't work, but I have no idea why.
I have several questions which may help to understand where the pb lies.
1/ What happens exactly in first after execution? (I believe there is exchange procedure between the two modems)
2/ What contain telemetry messages?
3/ Is it necessary to have a complete matching between airframe and hardware in the sense of : if a servo is not connected, or the engine, (for tests) could it raise a blank pb?
4/ Where are used the names PPRZ_GROUND and PPRZ_AIRBORNE that I entered during modems flashing?
Thanks for your help,
Arnaud