Re: [Paparazzi-devel] OSX installation - newlib download problem

[Bernard Davison]

That's a really good idea. :-) I've updated the portfile and pushed it to have 
a backup of my server.
When we get it a copy on Piotr's server we'll add that too.

Please feel free to merge this with the master.

Cheers,
Bernie.

On 16/02/2011, at 12:14 PM, Eric Parsonage wrote:

> Grrr that redhat site is a pain, what do you think of getting piotr to host 
> newlib on his server and we can have that as one of the places to pull from ?
> 
> 
> On 16/02/2011, at 11:36 AM, Bernard Davison wrote:
> 
>> Ok I've updated the sources that the port can be pulled from.
>> In my testing however it still falls back to the redhat source and I'm 
>> getting the same problem :-(
>> 
>> Seems the only solution is to keep trying as it will eventually succeed. :-(
>> 
>> Cheers,
>> Bernie.
>> 
>> On 16/02/2011, at 11:31 AM, Eric Parsonage wrote:
>> 
>>> Bernard 
>>> 
>>> In al the chaos getting the compiler working properly I think I have 
>>> reverted those changes (mainly because I didnt notice them :()
>>> You are the portfile master if you can get the time can you fix what I 
>>> wrecked :) please ?
>>> 
>>> Eric
>>> On 16/02/2011, at 10:07 AM, Bernard Davison wrote:
>>> 
>>>> I thought I had done this already...???
>>>> I'll check now and push an update if haven't.
>>>> 
>>>> Cheers,
>>>> Bernie.
>>>> 
>>>> On 16/02/2011, at 10:24 AM, Eric Parsonage wrote:
>>>> 
>>>>> Bernard,
>>>>> 
>>>>> Is there an alternative location we can get this from ? then modify the 
>>>>> port file to suit ?
>>>>> 
>>>>> 
>>>>> Eric
>>>>> 
>>>>> On 16/02/2011, at 7:39 AM, Bernard Davison wrote:
>>>>> 
>>>>>> Hi Leandro,
>>>>>> 
>>>>>> Yes Eric and I continually experienced this problem while developing the 
>>>>>> Mac port.
>>>>>> 
>>>>>> The only way I found to easily see that it was working was to install 
>>>>>> the arm-none-eabi-gcc-linaro port using the command
>>>>>> sudo port -d install arm-none-eabi-gcc-linaro
>>>>>> This would then print the download progress.
>>>>>> If I saw that the progress had stopped I would hit Control-C and try it 
>>>>>> again.
>>>>>> It would usually successfully download after a few attempts.
>>>>>> 
>>>>>> Cheers,
>>>>>> Bernie.
>>>>>> 
>>>>>> On 16/02/2011, at 2:30 AM, Chelini Leandro (chelilea) wrote:
>>>>>> 
>>>>>>> Hello
>>>>>>> Does anyone also have problems to fetch newlib-1.19.0.tar.gz?
>>>>>>> I've also tried to download it via firefox.
>>>>>>> I reach the FTP-Server but can not download the file...
>>>>>>> 
>>>>>>> OSX Terminal last line:
>>>>>>> --->  Attempting to fetch newlib-1.19.0.tar.gz from 
>>>>>>> ftp://sources.redhat.com/pub/newlib/
>>>>>>> 
>>>>>>> Leandro
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> Paparazzi-devel mailing list
>>>>>>> address@hidden
>>>>>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Paparazzi-devel mailing list
>>>>>> address@hidden
>>>>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Paparazzi-devel mailing list
>>>>> address@hidden
>>>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>>> 
>>>> _______________________________________________
>>>> Paparazzi-devel mailing list
>>>> address@hidden
>>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>> 
>>> 
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel

smime.p7s
Description: S/MIME cryptographic signature