[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Usb Error

From: Christophe De Wagter
Subject: Re: [Paparazzi-devel] Usb Error
Date: Mon, 13 Dec 2010 16:10:10 +0100

It is not an issue of the correct rights, otherwise it says: Permission Denied. Now it says not found which means:

- it is not connected
- cable is wrong (if leds don't blink than it can only be a D+ D- problem)
- if you run in a vitualbox, maybe windows has the USB device?
- try another USB port
- your microcontroller is broken: plug the miniusb in windows and then power your board and you get a bootloader device found message, then the microcontroller is OK. 
- lsusb can show the current usb devices in linux


On Sun, Dec 12, 2010 at 8:19 PM, Arun Sajeevan <address@hidden> wrote:
Hi all,
This is a continuation of previous logs. My previous errors were all eliminated.
Now we have been tryin to upload the aircraft files on to the Tiny via the usb directly.
As told, the leds were not blinking on connecting.But on uploading this is the error that I get:
no USB device
make[1]: *** [upload] Error 1
make[1]: Leaving directory `/home/manikandtan/paparazzi/sw/airborne'
make: *** [ap.upload] Error 2
make: Leaving directory `/home/manikandtan/paparazzi'
Now thse are the things that I have checked and tried:

1.Tries setting access rights as per

2.Run papz as sudo from terminal

3.Battery connected after USB

Nothing has changed however.
Can any1 help?

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]