[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Booz Spektrum AR7000 Satellite Integration Code

From: Adam Spence
Subject: Re: [Paparazzi-devel] Booz Spektrum AR7000 Satellite Integration Code
Date: Wed, 1 Dec 2010 18:20:38 -0600

It definately sounds like a baud rate issue but I can't imagine you would miss an interrupt. It's a pain to debug on the AVR unless you have a ICE.
I ported the code to a C# app and it worked very well so I know the code's good.
Whilst the AVRs are getting a bit long in the tooth they are very straight forward and for you I think they will work just fine. It's a good platform to start learning about embedded and the datasheets are always very useful. If you post your code (or email me a zip) I could take a quick look and see what might be the issue.

On 1 December 2010 15:30, antoine drouin <address@hidden> wrote:
a (cheap) logic analyzer ( see )  and/or JTAG
would probably be useful debugging tools for your issue.


 STM32F100C4T6B ( 2.35 euros each, 1.88 by ten)
 ATMEGA88PA-AU ( 2.52 euros each, 1.95 by ten )


Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]