[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] a small bug in GCS

From: Gautier Hattenberger
Subject: Re: [Paparazzi-devel] a small bug in GCS
Date: Wed, 24 Nov 2010 18:24:50 +0100
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv: Gecko/20101027 Thunderbird/3.0.10


It should work now. Don't forget to define MAX_BAT_LEVEL in the BAT section of your airframe.


Le 23/11/2010 19:59, Chris a écrit :
As i am not that good in the GCS code portion so is it possible to have a look at the
simulator window where the battery voltage can be set
(/home/hendrix/paparazzi/sw/simulator/launchsitl -a CESSNA -boot -norc)?
I use a 4 cell lipo pack but as soon as i try to adjust the voltage from 16.8v which is correctly set as the slider's maximum the slider range is automatically set to 13v so i can't adjust the voltage to the nominal 14.8v or go any higher than 13v.

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]