Re: [Paparazzi-devel] Booz

[antoine drouin]

Ola

Just a quick comment about names. In order to avoid confusion the code
formerly known as booz has now becomed the "rotorcraft firmware" and
the name booz refers to the square lpc2148 board.
The rotorcraft firmware runs both on booz board and on lisa (L and M)  boards.

Regards

Poine

On Fri, Nov 19, 2010 at 5:15 PM, Cédric Marzer <address@hidden> wrote:
> Hi all,
> I am considering replacing my Mikrokopter PCB with some sort of Booz
> hardware.
> I have experience with the paparazzi project for fixed wings having already
> built a funjet and a Mentor.
> My idea is to design a PCB with some well known hardware. I want to use some
> sparkfun gyros I still have.
> I also want to put a MAX OSD (OnScreenDisplay) chip on the board.
> I am ok with designing the board but I don't want to spend too much time
> debugging code. This is why my intention was to use the lpc2148 and use the
> booz code. I want to do some basic stuff like holding the position to take
> pictures or flying back home.
> Now my question is : is the Booz software working ok ? What would the
> advantage of lisa be for this project ?
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>