RE: [Paparazzi-devel] Powering the ArduIMU+ V2 with 3.3V

[mark.griffin]

Hi Oli,

You cannot power it through the 3.3V i2c connector. In fact, leave this pin unconnected.

You can power it with 5.0 volts on the VCC/5V pin or >6 volts on the VIN pin.

Cheers, mark

 

From: address@hidden [mailto:address@hidden On Behalf Of Ensslin Oliver (enso)
Sent: Wednesday, 10 November 2010 11:01 AM
To: address@hidden
Subject: [Paparazzi-devel] Powering the ArduIMU+ V2 with 3.3V

 

Hi all

 

I do not know how to power the ArduIMU+ V2.

 

Can I power it through the 3.3 V of the I2C connector or do I have to take the 5V on the other side of the board (the one in X direction)?

 

Your suggestions will be appreciated.

 

Oli