Re: [Paparazzi-devel] Missing Makefile.arm7 ?

[David Conger]

Hello,

This is interesting. I was using the commands I always use and that are on the 
WIki for programming the u-blox using the tunnel. I run make at the command 
line but used the MJ5 airframe which is one of the default ones. I guess the 
fault is in the MJ5 airframe file? 

It would be nice to have a default airframe files and custom airframe files. 
The defaults always being updated when the code changes. Although I'm not new 
and will make the changes required for someone new we should make an experience 
where following the commands on the Wiki or choosing defaults in the menu just 
work. I suppose it means when changes like this are made someone also changes 
the defaults as well.  With so many airframe files now that's not practical 
hence my suggestion to limit or separate them into default and custom or other 
or ?

Thank you Felix for helping. I will make the changes. To quickly solve my issue 
I just reverted SVN using: svn update -r 5920

-David
On Oct 7, 2010, at 3:58 AM, Felix Ruess wrote:

> Hi David,
> 
> the Makefile.arm7 is obsolete, we now have the more consistent
> Makefile.lpc21 for the tiny.
> 
> are you still using the old makefile section or did you switch to the
> new firmware/subsystems already?
> That sounds like you still use the old way and then you would have to
> adapt your makefile section.
> 
> If you use firmware/subsystems you should have something like this in
> your airframe file:
> 
>  <firmware name="setup">
>    <target name="tunnel"   board="tiny_2.11"/>
>  </firmware>
> 
> When you set the board it will automatically call the right Makefile
> for that architecture.
> (In this case $(TARGET).ARCHDIR is set to lpc21 in the
> tiny_2.11.makefile and then the correct Makefile.lpc21 will be called)
> 
> Cheers, Felix
> 
> On Thu, Oct 7, 2010 at 6:30 AM, David Conger <address@hidden> wrote:
>> I tried to program the tunnel into a Tiny2.11 tonight and get:
>> make[1]: Entering directory `/home/dconger/paparazzi3/sw/airborne'
>> Makefile:38: ../../conf/Makefile.arm7: No such file or direct
>> 
>> Sure enough the file isn't found anywhere. I did see it in a backup SVN and 
>> a change 2 weeks ago from flixr saying "moved arm7 directory to arch/lpc21 
>> and set most makefiles accordingly" ...
>> 
>> Do I need to fix a Makefile somewhere?
>> 
>> -David
>> 
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel