paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] Incorrect Battery Level


From: Reto Büttner
Subject: [Paparazzi-devel] Incorrect Battery Level
Date: Sat, 25 Sep 2010 16:08:36 +0200

Hi all,

I am configuring a new fixed wing airframe and don't get the battery
level reading correct. The GCS outputs 5.4 volts although the correct
voltage is 7.4V on my LiPo 2S. I am running a Tiny 2.11 and think I
have configured that correctly in the airframe file:

target name="ap" board="tiny_2.11"

I have read the posts in the mailing list archive. If I use the
standard configuration the battery level is at 5.4V. I tried
configuring it myself in the airframe file using lines like:

<define name="VoltageOfAdc(adc)" value ="(0.03703*adc)"/>

This changes the battery level reading, but I can't it right. Can someone help?

Thanks in advance!

Reto



reply via email to

[Prev in Thread] Current Thread [Next in Thread]