Re: RE: [Paparazzi-devel] Xbee pro modules won't communicate

[Marc Schwarzbach]

Hi,

you will definetely have to go through the manual of the XBee modems to get 
familiar with the settings and do some tial and error. We can not guide you in 
every small step...

For fast help on such topics, you might use the IRC. It´s also describes in the 
wiki...

Marc

-------- Original-Nachricht --------
> Datum: Mon, 9 Aug 2010 11:44:27 -0500
> Von: Edixon Giraldo <address@hidden>
> An: Paparazzi Mailing List <address@hidden>
> Betreff: RE: [Paparazzi-devel] Xbee pro modules won\'t communicate

> 
> I am sorry for my ignorance, but, how do you do that?  I am not familiar
> with the XCTU configuration software.
>  
> Thanks.
>  
> Eddie.
>  
> > Date: Mon, 9 Aug 2010 18:14:23 +0200
> > From: address@hidden
> > Subject: Re: [Paparazzi-devel] Xbee pro modules won't communicate
> > To: address@hidden
> > 
> > Hi,
> > 
> > you have to "bind" the modules if you want to use the transparent mode
> (what is suggested for the first trials..)
> > So go to CTU and set the number of the other module as destination
> adress. The same for the other module respectively.
> > 
> > Then they act just like a serial cable.
> > 
> > Marc
> > 
> > -------- Original-Nachricht --------
> > > Datum: Mon, 9 Aug 2010 10:37:31 -0500
> > > Von: Edixon Giraldo <address@hidden>
> > > An: "address@hidden" <address@hidden>
> > > Betreff: Re: [Paparazzi-devel] Xbee pro modules won\'t communicate
> > 
> > > No, I have not touched the firmware. I have no idea what is wrong
> then.
> > > Thanks.
> > > 
> > > Sent from my iPhone
> > > 
> > > On Aug 9, 2010, at 10:29 AM, Felix Ruess <address@hidden>
> wrote:
> > > 
> > > > then it should work out of the box... no coordinator needed.
> > > > unless you already flashed a different firmware.
> > > > 
> > > > On Mon, Aug 9, 2010 at 5:11 PM, Edixon Giraldo
> <address@hidden>
> > > wrote:
> > > >> I have the xbee pro 802.15.4
> > > >> 
> > > >> Sent from my iPhone
> > > >> 
> > > >> On Aug 9, 2010, at 9:59 AM, Felix Ruess <address@hidden>
> wrote:
> > > >> 
> > > >>> Hi,
> > > >>> 
> > > >>> the configuration (coordinator needed or not) you need depends on
> > > >>> which version exactly you have.
> > > >>> 
> > > >>> Basically two different hardware/software stacks:
> > > >>> Digi XBee Pro 802.15.4 and Digi XBee Pro ZB
> > > >>> 
> > > >>> See http://paparazzi.enac.fr/wiki/Modems for that also
> > > >>> 
> > > >>> Cheers, Felix
> > > >>> 
> > > >>> On Mon, Aug 9, 2010 at 4:43 PM, maq <address@hidden> wrote:
> > > >>>> Did you already check out this guide? I used it successfully a
> few
> > > weeks
> > > >>>> ago.
> > > >>>> 
> > > >>>> http://pixhawk.ethz.ch/tutorials/how_to_configure_xbee
> > > >>>> 
> > > >>>> 
> > > >>>> Am 09.08.2010 um 16:28 schrieb Edixon Giraldo:
> > > >>>> 
> > > >>>>> Hi, I have been working with this for hours and cannot make the
> xbee
> > > >>>>> modules to communicate with each other. I am very new at this,
> > > therefore, I
> > > >>>>> am not very familiar on bow to set them up to make one the
> > > coordinator and
> > > >>>>> the other one the server. Any ideas on how to do this in XTCU? I
> did
> > > find
> > > >>>>> some instructions on how to do this, but, it was not clear to
> me. It
> > > seems
> > > >>>>> that you have to type some commands on a terminal. I have also
> been
> > > trying
> > > >>>>> to run range tests and all, but, it is not successful.
> > > >>>>> Any help will be greatly appreciated.
> > > >>>>> 
> > > >>>>> Thanks.
> > > >>>>> 
> > > >>>>> Eddie.
> > > >>>>> 
> > > >>>>> Sent from my iPhone
> > > >>>>> _______________________________________________
> > > >>>>> Paparazzi-devel mailing list
> > > >>>>> address@hidden
> > > >>>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> > > >>>> 
> > > >>>> 
> > > >>>> _______________________________________________
> > > >>>> Paparazzi-devel mailing list
> > > >>>> address@hidden
> > > >>>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> > > >>>> 
> > > >>> 
> > > >>> _______________________________________________
> > > >>> Paparazzi-devel mailing list
> > > >>> address@hidden
> > > >>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> > > >>> 
> > > >> 
> > > >> _______________________________________________
> > > >> Paparazzi-devel mailing list
> > > >> address@hidden
> > > >> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> > > >> 
> > > > 
> > > > _______________________________________________
> > > > Paparazzi-devel mailing list
> > > > address@hidden
> > > > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> > > > 
> > > 
> > > _______________________________________________
> > > Paparazzi-devel mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> > 
> > -- 
> > Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief! 
> > Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail
> > 
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>                                         

-- 
Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief!  
Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail