Re: [Paparazzi-devel] Shopping list for a Lisa with Gumstix setup. What do I need?

[J. L.]

You will get better results using a USB wifi adapter than the gumstix
onboard wifi, the libertas driver is not that great speeds and
reliability are hit and miss with the on board wifi. I own a fire
personally. Just my opinion.



2010/8/4 Ørjan Pettersen <address@hidden>:
> Hello!
>
> I have finally decided to buy a Paparazzi autopilot.
>
> I have the airframe. It is the Multiplex Funjet.
>
>
> The following stuff have been ordered.
>
> The Lisa board from JobyRobotics.com
>
> From PPZUAV, Receiver board, Paparazzi GPS v1.3 Assembled LEA-5H, IR
> Sensors.
>
>
> Further I will need a Gumstix board. But what exactly do I need here to be
> able to connect it to the Lisa board and to the computer to program it? I
> might go for one with onboard WiFi.
>
> Where do I get the needed cables? I guess I need the following...
> # An USB to autopilot cable,
> # A cable from the receiver to the receiver board, and a cable from the
> receiver board to the autopilot.
> # Cables from the two IR sensors to the autopilot.
> # Cable from the GPS to the autopilot.
> # Cables from the servos and ESC to the autopilot.
> # Cable from the Gumstix to the Lisa autopilot.
> # Power cables to both the Lisa autopilot and to the Gumstix.
>
> Anything else?
>
> Oerjan Pettersen
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>