[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Paparazzi-devel] Shopping list for a Lisa with Gumstix setup. What do I
From: |
Ørjan Pettersen |
Subject: |
[Paparazzi-devel] Shopping list for a Lisa with Gumstix setup. What do I need? |
Date: |
Wed, 04 Aug 2010 12:44:58 +0200 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.7) Gecko/20100720 Lightning/1.0b2 Lanikai/3.1.1 |
Hello!
I have finally decided to buy a Paparazzi autopilot.
I have the airframe. It is the Multiplex Funjet.
The following stuff have been ordered.
The Lisa board from JobyRobotics.com
From PPZUAV, Receiver board, Paparazzi GPS v1.3 Assembled LEA-5H, IR
Sensors.
Further I will need a Gumstix board. But what exactly do I need here to
be able to connect it to the Lisa board and to the computer to program
it? I might go for one with onboard WiFi.
Where do I get the needed cables? I guess I need the following...
# An USB to autopilot cable,
# A cable from the receiver to the receiver board, and a cable from the
receiver board to the autopilot.
# Cables from the two IR sensors to the autopilot.
# Cable from the GPS to the autopilot.
# Cables from the servos and ESC to the autopilot.
# Cable from the Gumstix to the Lisa autopilot.
# Power cables to both the Lisa autopilot and to the Gumstix.
Anything else?
Oerjan Pettersen
- [Paparazzi-devel] Shopping list for a Lisa with Gumstix setup. What do I need?,
Ørjan Pettersen <=