paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Strange Surging Behavior


From: antoine drouin
Subject: Re: [Paparazzi-devel] Strange Surging Behavior
Date: Mon, 12 Jul 2010 21:58:11 +0200

that, you want :

http://www.castlecreations.com/products/ccbec.html

Regards

Poine

ps: I agree, more than two micro servos on the autopilot's supply is a
bad idea.....

On Mon, Jul 12, 2010 at 9:49 PM, Felix Ruess <address@hidden> wrote:
> Hi Jeff,
>
> BEC is an abbreviation for Battery Elimination Circuit, meaning you
> eliminate the extra battery for the servos. It is basically just a
> voltage regulator that produces 5V from your battery. As Maik said you
> can just use the 5V provided by the BEC of your speed controller.
>
> Cheers, Felix
>
> On Mon, Jul 12, 2010 at 9:37 PM, Maik Höpfel <address@hidden> wrote:
>> Yes, especially digital servos can get very high peak currents. Just hook
>> them up to the BEC from your speed controller.
>>
>> - Maik
>>
>> Am 12.07.2010 20:15 schrieb "Felix Ruess" <address@hidden>:
>>
>> Hi Jeff,
>>
>> to me that sounds like your servos are drawing too much power with the
>> more rapid corrections of the AUTO modes. Especially since it works if
>> you have one or two disconnected.
>> If the servos draw too much current the voltage will break down and
>> the twog probably resets.
>> I would recommend to check that and maybe use an extra power source
>> for your servos.
>>
>> Cheers, Felix
>>
>> On Mon, Jul 12, 2010 at 7:07 PM, <address@hidden> wrote:
>>> Hello All,
>>>
>>> I am experiencing ...
>>
>>> _______________________________________________
>>> Paparazzi-devel mailing list
>>> address@hidden
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]