paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Spektrum Satellite Receiver


From: Gareth Roberts
Subject: Re: [Paparazzi-devel] Spektrum Satellite Receiver
Date: Sat, 23 Jan 2010 23:33:39 +0000

Good idea Todd, but one step at a time!  

We'd just be happy to have the one, it's functionally identical to the
main receiver so in theory should have the same range as a slightly
cheaper Spektrum set without the diversity receiver.  We fly near power
lines and are getting sick of 35MHz random control inputs.
I'd be quite happy otherwise to try and make the alterations myself, but
I'm unclear as to how much core code Booz and Paparazzi share.  Just
wondered if someone had done it already, or if I can just change a
compile flag (assuming the data structures in the Booz code are
compatible).

Cheers!
--G

On Sat, 2010-01-23 at 13:43 -0800, Todd Sandercock wrote:
> If you want some reliable range having more than one satelite would be a good 
> move. Multiple usarts would be required for that which leads to the use of an 
> external micro. I did some research into this and concluded an XMEGA chip 
> would be perfect for this until I realised that the chip can't be programed 
> with ISP (I don't have the right programmer for it). The smallest chip has 5 
> usarts from memory which means good expanability if someone wanted to go 
> crazy with the satelites
> 
> Sparkfun have back in stock a break out board that would be suitable for the 
> XMEGA but would require soldering the chip on. (not that hard)
> 
> Just ideas..... 
> 
> Todd
> 
> On 24/01/2010, at 7:35 AM, Gareth Roberts <address@hidden> wrote:
> 
> Hello everyone,
> 
> We've got a Spekrum DX-7, with an AR-7000 receiver.  It's satellite
> (diversity) receiver communicates with the main bit using a simple
> serial protocol.  Code to translate this has been written for the Booz,
> but not for paparazzi core.  Is there any way to reuse this code for the
> traditional system? Or will I have to adapt it?
> 
> Many Thanks
> --G
> 
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> 
> 
>       
> __________________________________________________________________________________
> See what's on at the movies in your area. Find out now: 
> http://au.movies.yahoo.com/session-times/
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel






reply via email to

[Prev in Thread] Current Thread [Next in Thread]