[Paparazzi-devel] Problems with USB Programmer

[Zico Kolter]

Hey,
We just got a Tiny 2.11 board (from PPZUAV), and are having some issues
right off the bat.  It appears that my computer (and several others I've
tried) isn't recognizing the USB programming cable.  When we try to
upload a configuration to the Tiny 2.11, the Paparazzi center program
outputs "no USB device." It seems like the USB port just isn't being
recognized; dmesg gives the following output after turning on the Tiny
with the USB cable connected:

[ 8504.168149] usb 3-1: new full speed USB device using uhci_hcd and
address 15
[ 8504.288155] usb 3-1: device descriptor read/64, error -71
[ 8504.512239] usb 3-1: device descriptor read/64, error -71
[ 8504.728154] usb 3-1: new full speed USB device using uhci_hcd and
address 16
[ 8504.848132] usb 3-1: device descriptor read/64, error -71
[ 8505.072149] usb 3-1: device descriptor read/64, error -71
[ 8505.288139] usb 3-1: new full speed USB device using uhci_hcd and
address 17
[ 8505.700105] usb 3-1: device not accepting address 17, error -71
[ 8505.812212] usb 3-1: new full speed USB device using uhci_hcd and
address 18
[ 8506.224081] usb 3-1: device not accepting address 18, error -71
[ 8506.224125] hub 3-0:1.0: unable to enumerate USB device on port 1

Has anyone seen this or something similar?

Thanks!
Zico