[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] hi Questions about UART1

From: Haiyang Chao
Subject: Re: [Paparazzi-devel] hi Questions about UART1
Date: Tue, 29 Jul 2008 20:25:49 -0600

I used Maxstream 9xtend. I got similar problem last week and I found out the firmware on the modem is corrupted due to some unknown reason (x-ctu can not detect the correct firmware version number). I just rewrite the modem firmware and the problem is fixed.

I don't know what exact problem u may have. Hope this helps. Just make sure the modem can talk with each other first.


On Tue, Jul 29, 2008 at 4:21 PM, 최원재 <address@hidden> wrote:
hi guys! I am almost new to this paparazzi.. plz help me~

I have some problem with UART1.. I found my modem is working well on
xp with X-CTU..(actually It worked well before) suddenly However my
modem can't have communication between each other. while I pulged it
on the board, it doesn't work with U-CENTER on xp but I can upload
I think there is some problem with UART1 which allows modem to
communicate betwwen the board and PC..

my question is " how can I solve this problem? " plz give me some information!!


Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]