Re: [Paparazzi-devel] GPS tunnel for Tiny1.3 & 2.11

[C Kuo]

Dear Mohammad

  Thanks for the reply, I will give a try as soon as I my Lea-4p arrvie, thanks
for the infromation.



Regards

                                                                     Chen

Quoting Mohammad Ali Haji Pour <address@hidden>:

> Kuo,
> 
> "myplane" and "ppz1" are just the names of the aircraft that should be
> changed with your own plane name if required. you can save a new plane with
> preferred configurations in the ppz center. The tunnel is uploaded with USB
> and you can read from the GPS (in u-center) through the FTDI cable.
> 
> Best Regards,
> 
> Mohammad
> 
> ----- Original Message -----
> From: C Kuo <address@hidden>
> Date: Monday, June 2, 2008 2:40 pm
> Subject: [Paparazzi-devel] GPS tunnel for Tiny1.3 & 2.11
> To: address@hidden
> 
> 
> > Hi guys
> > 
> > 
> >   After long time, I am now able to program my Tiny1.3 board, however, 
> > I have
> > some question relate to the tunnel for GPS.
> > 
> > 
> >   In the wiki, it say that for Tiny 1.3 the tunnel should be : "make
> > AIRCRAFT=myplane tunnel.upload", and for the Tiny2.11 should be "  make
> > AIRCRAFT=ppz1 tunnel.upload "
> > 
> >   I was wondering, from the paparazzi center I can see that putting 
> > the tunnel
> > target should work with Tiny.2.11, will it work with Tiny 1.3?
> > 
> >   also, for Tiny1.3, is the tunnel also upload though the USB cable to 
> > "serial
> > 2" port?
> > 
> > 
> > 
> > Thanks 
> > 
> >                                                           Chen 
> > 
> > 
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>