RE: [Paparazzi-devel] bootloader problem in Tiny13

[david]

FWIW: I had a Tin1.3 just like that. In fact without grounding the P0.14
it would accept the tunnel upload command every time. As it P0.14 was
grounded all the time. I had bought the PCB from that RCTECHNIX site.
Maybe there is a short in the PCB somewhere? DUnno just under xray the
thing appeared just fine (someone at work had it checked out with an
xray looking for an issue and found none).

If you find the answer maybe I will pull the board out of storage and
see if it has the same issue. 

-David Conger

On Tue, 2008-04-22 at 15:02 -0400, Tom Apker wrote:
> Nope, cable disconnected and it still doesn't work.  I wonder if
> something shorted on the board.
> 
> -tba
> 
> On Tue, Apr 22, 2008 at 12:00 PM,  <address@hidden> wrote:
> > Send Paparazzi-devel mailing list submissions to
> >         address@hidden
> >
> >  To subscribe or unsubscribe via the World Wide Web, visit
> >         http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >  or, via email, send a message with subject or body 'help' to
> >         address@hidden
> >
> >  You can reach the person managing the list at
> >         address@hidden
> >
> >  When replying, please edit your Subject line so it is more specific
> >  than "Re: Contents of Paparazzi-devel digest..."
> >
> >
> >  Today's Topics:
> >
> >    1. Correct Throttle output with futaba radio (Daniel Morgan)
> >    2. bootloader problem in Tiny13 (Tom Apker)
> >    3. Re: Correct Throttle output with futaba radio (address@hidden)
> >    4. RE: bootloader problem in Tiny13 (address@hidden)
> >
> >
> >  ----------------------------------------------------------------------
> >
> >  Message: 1
> >  Date: Mon, 21 Apr 2008 15:59:21 -0600
> >  From: "Daniel Morgan" <address@hidden>
> >  Subject: [Paparazzi-devel] Correct Throttle output with futaba radio
> >  To: address@hidden
> >  Message-ID:
> >         <address@hidden>
> >  Content-Type: text/plain; charset="iso-8859-1"
> >
> >  So I have a futaba radio and when my throttle is at full the gcs reports 1%
> >  and when not on it reports it at 100%... So my question is how can i fix
> >  this so the reporting is accurate?
> >  -------------- next part --------------
> >  An HTML attachment was scrubbed...
> >  URL: 
> > http://lists.gnu.org/pipermail/paparazzi-devel/attachments/20080421/d428106d/attachment.html
> >
> >  ------------------------------
> >
> >  Message: 2
> >  Date: Mon, 21 Apr 2008 18:19:22 -0400
> >  From: "Tom Apker" <address@hidden>
> >  Subject: [Paparazzi-devel] bootloader problem in Tiny13
> >  To: address@hidden
> >  Message-ID:
> >         <address@hidden>
> >  Content-Type: text/plain; charset=ISO-8859-1
> >
> >  Hello everybody,
> >
> >      I have a Tiny13 board that will not start its flashed program
> >  after I power it off and then power it back on.  I did use the
> >  bootloader the first time I programmed it, and tried to reload the
> >  bootloader.  I got this output:
> >
> >  ioctl get failed
> >  ioctl get failed
> >  ioctl set ok, status = 186A4
> >  ioctl get failed
> >  ioctl get failed
> >  ioctl set ok, status = 186A0
> >  ioctl get failed
> >  Synchronizing. OK
> >  Read bootcode version: 2.12.0
> >  Read part ID: LPC2148, 512 kiB ROM / 40 kiB SRAM (67305253)
> >  Sector 0: 
> > ...............................................................................................
> >  Sector 1: 
> > ...........................................................................
> >  Download Finished... taking 7 seconds
> >  Now launching the brand new code
> >  ioctl get failed
> >  ioctl set ok, status = 2
> >  ioctl get failed
> >  ioctl get failed
> >  ioctl set ok, status = 186A0
> >  ioctl get failed
> >
> >  It appears to run just fine if I power up, program, and go.  However,
> >  I cannot power up, program, shut down, and power up properly a second
> >  time.  I don't think I let the smoke out of the board, but I can't see
> >  any reason why it doesn't work on a restart.
> >
> >  Any help would be appreciated.
> >
> >  Many thanks,
> >
> >  Tom
> >
> >
> >
> >
> >  ------------------------------
> >
> >  Message: 3
> >  Date: Mon, 21 Apr 2008 23:40:29 GMT
> >  From: "address@hidden" <address@hidden>
> >  Subject: Re: [Paparazzi-devel] Correct Throttle output with futaba
> >         radio
> >  To: address@hidden
> >  Message-ID: <address@hidden>
> >  Content-Type: text/plain; charset="windows-1252"
> >
> >  In the messages you can read the exact pwm value of the throttle signal 
> > and put those in your airframe file as min, max, and neutral.  Note that in 
> > your case min and max are currently reversed.  Neutral is the signal it 
> > will send at boot and should normally be the same as min.  Same with all 
> > other servos.  Zero throttle should be configured to be a few clicks short 
> > of zero stick to ensure that off stays off.
> >  Note: the pwm values of your TX should match that of your radio file in 
> > conf/radios
> >
> >
> >  -- "Daniel Morgan" <address@hidden> wrote:
> >  So I have a futaba radio and when my throttle is at full the gcs reports 
> > 1% and when not on it reports it at 100%... So my question is how can i fix 
> > this so the reporting is accurate?
> >
> >
> >  _____________________________________________________________
> >  Click to get the coolest ring tones on your phone, fast and easy
> >  
> > http://thirdpartyoffers.juno.com/TGL2121/fc/Ioyw6i3mmxTc6s26CiUAOxHJ3YPgLHdQYRrOpUk25zSgBMDo2XyGTz/
> >  -------------- next part --------------
> >  An HTML attachment was scrubbed...
> >  URL: 
> > http://lists.gnu.org/pipermail/paparazzi-devel/attachments/20080421/dfdf4bbe/attachment.html
> >
> >  ------------------------------
> >
> >  Message: 4
> >  Date: Mon, 21 Apr 2008 17:16:15 -0700
> >  From: address@hidden
> >  Subject: RE: [Paparazzi-devel] bootloader problem in Tiny13
> >  To: address@hidden
> >  Message-ID:
> >         <address@hidden>
> >
> >  Content-Type: text/plain; charset="us-ascii"
> >
> >  An HTML attachment was scrubbed...
> >  URL: 
> > http://lists.gnu.org/pipermail/paparazzi-devel/attachments/20080421/b911e087/attachment.html
> >
> >  ------------------------------
> >
> >  _______________________________________________
> >  Paparazzi-devel mailing list
> >  address@hidden
> >  http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
> >  End of Paparazzi-devel Digest, Vol 49, Issue 25
> >  ***********************************************
> >
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>