paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] loading bl ram.hex =?ISO-8859-1?Q???=


From: Pascal Brisset
Subject: Re: [Paparazzi-devel] loading bl ram.hex =?ISO-8859-1?Q???=
Date: Wed, 09 Apr 2008 18:09:00 +0200
User-agent: Icedove 1.5.0.14pre (X11/20080305)

Hi,

or with the Paparazzi Center: Button "New Target" (where the default is "tunnel") and "Upload"

--Pascal

Miles Colman wrote:
Hi Martin,
Thanks a lot! Your suggestion worked.

To anyone confused about loading the gps tunnel:
I thought I was following the wiki when I was trying to upload the gps tunnel. (I was trying to upload via the same connection that sucessfully uploaded the lpc2148 bootloader.) Use the usb connection on the paparazzi board per Martin's suggestion, and you can upload the tunnel. Here's how not to upload the gps tunnel to a Tiny v2.11, with how to do it below:



address@hidden:~/paparazzi3$ make AIRCRAFT=MJ5 tunnel.upload FLASH_MODE=IAS

[compile results]

.dtors        0        17044
.data         0   1073741824
.bss          0   1073741824
.stack     4096   1073741824
.comment     18            0
Total      4774



cd sw/airborne; make PAPARAZZI_SRC=/home/mcolman/paparazzi3 PAPARAZZI_HOME=/home/mcolman/paparazzi3 TARGET=tunnel upload

lpc21isp /home/mcolman/paparazzi3/var/MJ5/tunnel/tunnel.hex /dev/ttyS0 38400 12000
lpc21isp version 1.27
File /home/mcolman/paparazzi3/var/MJ5/tunnel/tunnel.hex:
        loaded...
        converted to binary format...
        image size : 17044
Synchronizing.................................................................................................... no answer on '?'
make[1]: *** [upload] Error 4
make: *** [tunnel.upload] Error 2




Here's a working example:
(connect computer to usb port on the Tiny)



address@hidden:~/paparazzi3$ make AIRCRAFT=MJ5 tunnel.upload FLASH_MODE=IAP

[text about compiling]

make[1]: Nothing to be done for `all_ac_h'.
cd sw/airborne; make PAPARAZZI_SRC=/home/mcolman/paparazzi3 PAPARAZZI_HOME=/home
/mcolman/paparazzi3 TARGET=tunnel all

/home/mcolman/paparazzi3/var/MJ5/tunnel/tunnel.elf  :
section    size         addr
.text       660        16384
.ctors        0        17044
.dtors        0        17044
.data         0   1073741824
.bss          0   1073741824
.stack     4096   1073741824
.comment     18            0
Total      4774




/home/mcolman/paparazzi3/var/MJ5/tunnel/tunnel.elf  :
section    size         addr
.text       660        16384
.ctors        0        17044
.dtors        0        17044
.data         0   1073741824
.bss          0   1073741824
.stack     4096   1073741824
.comment     18            0
Total      4774



cd sw/airborne; make PAPARAZZI_SRC=/home/mcolman/paparazzi3 PAPARAZZI_HOME=/home
/mcolman/paparazzi3 TARGET=tunnel upload
/home/mcolman/paparazzi3/sw/ground_segment/lpc21iap/lpc21iap /home/mcolman/papa
razzi3/var/MJ5/tunnel/tunnel.elf
.
Found USB device
BootROM code: 2.12
Part ID: 0x0402FF25 (LPC2148, 512k Flash, 32k+8k RAM)
BootLoader version: 1.3
#
Starting software at 0x00004000

2008/3/28 <address@hidden <mailto:address@hidden>>:

    Hi Miles,

    > I just finished assembling a Tiny v2.11 and I think I haven't
    successfully loaded
    > the bootloader. Terminal output with 'ioctl get failed' is
    below. Am I
    sucessfully
    > loading the bootloader to the Tiny?

    Looks good, LPC is running and communicating with the PC
    (regarding the
    message title, you are loading bl.hex rather than bl_ram.hex).

    > The reason I think the upload doesn't work is the 'ioctl get failed'
    message, and,
    > uploading the serial tunnel to the Tiny from the ground station
    fails.

    You can ignore the "ioctl get failed" after download is
    "finished". Are
    all the four USB lines Vbus, GND, D+ and D- connected? Do you see the
    device using "lsusb"?

    Martin





    _______________________________________________
    Paparazzi-devel mailing list
    address@hidden <mailto:address@hidden>
    http://lists.nongnu.org/mailman/listinfo/paparazzi-devel


------------------------------------------------------------------------

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel





reply via email to

[Prev in Thread] Current Thread [Next in Thread]