[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[paparazzi-commits] [6055] Add Booz2 IMU 1.2 test program rule (not work
From: |
Allen Ibara |
Subject: |
[paparazzi-commits] [6055] Add Booz2 IMU 1.2 test program rule (not working yet) |
Date: |
Sun, 03 Oct 2010 21:55:17 +0000 |
Revision: 6055
http://svn.sv.gnu.org/viewvc/?view=rev&root=paparazzi&revision=6055
Author: aibara
Date: 2010-10-03 21:55:16 +0000 (Sun, 03 Oct 2010)
Log Message:
-----------
Add Booz2 IMU 1.2 test program rule (not working yet)
Modified Paths:
--------------
paparazzi3/trunk/conf/autopilot/lisa_l_test_progs.makefile
Modified: paparazzi3/trunk/conf/autopilot/lisa_l_test_progs.makefile
===================================================================
--- paparazzi3/trunk/conf/autopilot/lisa_l_test_progs.makefile 2010-10-02
01:59:51 UTC (rev 6054)
+++ paparazzi3/trunk/conf/autopilot/lisa_l_test_progs.makefile 2010-10-03
21:55:16 UTC (rev 6055)
@@ -320,8 +320,49 @@
test_imu_b2.srcs += $(SRC_BOOZ)/peripherals/booz_max1168.c
$(SRC_BOOZ_ARCH)/peripherals/booz_max1168_arch.c
test_imu_b2.srcs += $(SRC_BOOZ)/peripherals/booz_ms2001.c
$(SRC_BOOZ_ARCH)/peripherals/booz_ms2001_arch.c
+#
+# test IMU b2 1.2
+#
+# configuration
+# SYS_TIME_LED
+# MODEM_PORT
+# MODEM_BAUD
+#
+test_imu_b2_2.ARCHDIR = $(ARCHI)
+test_imu_b2_2.CFLAGS = -I$(SRC_LISA) -I$(ARCHI) -I$(SRC_BOOZ)
-I$(SRC_BOOZ_ARCH) -DPERIPHERALS_AUTO_INIT
+test_imu_b2_2.CFLAGS += -DBOARD_CONFIG=$(BOARD_CFG)
+test_imu_b2_2.srcs += $(SRC_BOOZ_TEST)/booz_test_imu.c \
+ $(SRC_ARCH)/stm32_exceptions.c \
+ $(SRC_ARCH)/stm32_vector_table.c
+test_imu_b2_2.CFLAGS += -DUSE_LED
+test_imu_b2_2.srcs += $(SRC_ARCH)/led_hw.c
+test_imu_b2_2.CFLAGS += -DUSE_SYS_TIME
+test_imu_b2_2.CFLAGS += -DSYS_TIME_LED=$(SYS_TIME_LED)
+test_imu_b2_2.CFLAGS += -DPERIODIC_TASK_PERIOD='SYS_TICS_OF_SEC((1./512.))'
+test_imu_b2_2.srcs += sys_time.c $(SRC_ARCH)/sys_time_hw.c
+
+test_imu_b2_2.CFLAGS += -DUSE_$(MODEM_PORT) -D$(MODEM_PORT)_BAUD=$(MODEM_BAUD)
+test_imu_b2_2.srcs += $(SRC_ARCH)/uart_hw.c
+
+test_imu_b2_2.CFLAGS += -DDOWNLINK -DDOWNLINK_TRANSPORT=PprzTransport
-DDOWNLINK_DEVICE=Uart2
+test_imu_b2_2.srcs += downlink.c pprz_transport.c
+
+test_imu_b2_2.srcs += math/pprz_trig_int.c
+
+test_imu_b2_2.CFLAGS += -DBOOZ_IMU_TYPE_H=\"imu/booz_imu_b2.h\"
+test_imu_b2_2.CFLAGS += -DIMU_B2_MAG_TYPE=IMU_B2_MAG_HMC5843
-DIMU_B2_VERSION_1_2
+test_imu_b2_2.srcs += $(SRC_BOOZ)/booz_imu.c
+test_imu_b2_2.CFLAGS += -DMAX_1168_DRDY_PORT=$(MAX_1168_DRDY_PORT)
+test_imu_b2_2.CFLAGS +=
-DMAX_1168_DRDY_PORT_SOURCE=$(MAX_1168_DRDY_PORT_SOURCE)
+test_imu_b2_2.CFLAGS += -DUSE_SPI2 -DUSE_DMA1_C4_IRQ -DUSE_EXTI2_IRQ
-DUSE_SPI2_IRQ
+test_imu_b2_2.srcs += $(SRC_BOOZ)/imu/booz_imu_b2.c
$(SRC_BOOZ_ARCH)/imu/booz_imu_b2_arch.c
+test_imu_b2_2.srcs += $(SRC_BOOZ)/peripherals/booz_max1168.c
$(SRC_BOOZ_ARCH)/peripherals/booz_max1168_arch.c
+test_imu_b2_2.srcs += $(SRC_BOOZ)/peripherals/booz_hmc5843.c #
$(SRC_BOOZ_ARCH)/peripherals/booz_hmc5843.c
+
+
+
#
# test IMU aspirin
#
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [paparazzi-commits] [6055] Add Booz2 IMU 1.2 test program rule (not working yet),
Allen Ibara <=