[paparazzi-commits] [5631] added easy glider example that used adc generic

[Felix Ruess]

Revision: 5631
          http://svn.sv.gnu.org/viewvc/?view=rev&root=paparazzi&revision=5631
Author:   flixr
Date:     2010-08-23 18:23:50 +0000 (Mon, 23 Aug 2010)
Log Message:
-----------
added easy glider example that used adc generic

Modified Paths:
--------------
    paparazzi3/trunk/conf/boards/tiny_0.99.makefile

Added Paths:
-----------
    paparazzi3/trunk/conf/airframes/easy_glider_example.xml

Added: paparazzi3/trunk/conf/airframes/easy_glider_example.xml
===================================================================
--- paparazzi3/trunk/conf/airframes/easy_glider_example.xml                     
        (rev 0)
+++ paparazzi3/trunk/conf/airframes/easy_glider_example.xml     2010-08-23 
18:23:50 UTC (rev 5631)
@@ -0,0 +1,185 @@
+<!DOCTYPE airframe SYSTEM "./airframe.dtd">
+
+<airframe name="Easy Glider Tiny 0.99">
+
+<!-- commands section -->
+  <servos>
+    <servo name="THROTTLE" no="0" min="1290" neutral="1290" max="1810"/>
+    <servo name="ELEVATOR" no="1" min="1770" neutral="1457" max="970"/>
+    <servo name="RUDDER" no="3" min="1040" neutral="1595" max="2040"/>
+    <servo name="AILERON_LEFT" no="4" min="1000" neutral="1508" max="2000"/>
+    <servo name="AILERON_RIGHT" no="5" min="1000" neutral="1527" max="2000"/>
+  </servos>
+
+  <commands>
+    <axis name="THROTTLE" failsafe_value="0"/>
+    <axis name="ROLL" failsafe_value="0"/>
+    <axis name="PITCH" failsafe_value="0"/>
+    <axis name="YAW" failsafe_value="0"/>
+  </commands>
+
+  <rc_commands>
+    <set command="THROTTLE" value="@THROTTLE"/>
+    <set command="ROLL" value="@ROLL"/>
+    <set command="PITCH" value="@PITCH"/>
+    <set command="YAW" value="@YAW"/>
+  </rc_commands>
+
+  <section name="MIXER">
+     <define name="AILERON_DIFF" value="0.66"/>
+     <define name="COMBI_SWITCH" value="1.0"/>
+  </section>
+
+  <command_laws>
+    <set servo="THROTTLE" value="@THROTTLE"/>
+    <set servo="ELEVATOR" value="@PITCH"/>
+    <set servo="RUDDER" value="@YAW + @ROLL*COMBI_SWITCH"/>
+
+    <let var="roll" value="@ROLL"/>
+    <set servo="AILERON_LEFT" value="($roll > 0 ? 1 : AILERON_DIFF) * $roll"/>
+    <set servo="AILERON_RIGHT" value="($roll > 0 ? AILERON_DIFF : 1) * $roll"/>
+  </command_laws>
+
+  <section name="AUTO1" prefix="AUTO1_">
+    <define name="MAX_ROLL" value="0.7"/>
+    <define name="MAX_PITCH" value="0.6"/>
+  </section>
+
+  <section name="INFRARED" prefix="IR_">
+    <define name="ADC_IR1_NEUTRAL" value="512"/>
+    <define name="ADC_IR2_NEUTRAL" value="512"/>
+    <define name="ADC_TOP_NEUTRAL" value="512"/>
+
+    <define name="HORIZ_SENSOR_TILTED" value="1"/>
+    <define name="IR2_SIGN" value="-1"/>
+    <define name="TOP_SIGN" value="1"/>
+
+    <define name="LATERAL_CORRECTION" value="0.75"/>
+    <define name="LONGITUDINAL_CORRECTION" value="0.75"/>
+    <define name="VERTICAL_CORRECTION" value="1.5"/>
+
+    <define name="ROLL_NEUTRAL_DEFAULT" value="0." unit="deg"/>
+    <define name="PITCH_NEUTRAL_DEFAULT" value="18" unit="deg"/>
+
+    <define name="CORRECTION_UP" value="1.0"/>
+    <define name="CORRECTION_DOWN" value="1.0"/>
+    <define name="CORRECTION_LEFT" value="1.0"/>
+    <define name="CORRECTION_RIGHT" value="1.0"/>
+  </section>
+
+  <section name="BAT">
+    <define name="MILLIAMP_AT_FULL_THROTTLE" value="10000."/>
+   <!--define name="MILLIAMP_PER_PERCENT" value="0.86"/-->
+    <define name="CATASTROPHIC_BAT_LEVEL" value="9.3" unit="V"/>
+  </section>
+
+  <section name="MISC">
+    <define name="NOMINAL_AIRSPEED" value="13." unit="m/s"/>
+    <define name="CARROT" value="5." unit="s"/>
+    <define name="KILL_MODE_DISTANCE" value="(1.5*MAX_DIST_FROM_HOME)"/>
+    <define name="CONTROL_RATE" value="60" unit="Hz"/>
+    <define name="ALT_KALMAN_ENABLED" value="TRUE"/>
+
+    <define name="DEFAULT_CIRCLE_RADIUS" value="80."/>
+
+    <define name="GLIDE_AIRSPEED" value="10"/>
+    <define name="GLIDE_VSPEED" value="3."/>
+    <define name="GLIDE_PITCH" value="45" unit="deg"/>
+  </section>
+
+  <section name="VERTICAL CONTROL" prefix="V_CTL_">
+
+    <define name="POWER_CTL_BAT_NOMINAL" value="11.1" unit="volt"/>
+    <!-- outer loop proportional gain -->
+    <define name="ALTITUDE_PGAIN" value="-0.03"/>
+    <!-- outer loop saturation -->
+    <define name="ALTITUDE_MAX_CLIMB" value="2."/>
+
+    <!-- auto throttle inner loop -->
+    <define name="AUTO_THROTTLE_NOMINAL_CRUISE_THROTTLE" value="0.55"/>
+    <define name="AUTO_THROTTLE_MIN_CRUISE_THROTTLE" value="0.25"/>
+    <define name="AUTO_THROTTLE_MAX_CRUISE_THROTTLE" value="0.85"/>
+    <define name="AUTO_THROTTLE_LOITER_TRIM" value="1500"/>
+    <define name="AUTO_THROTTLE_DASH_TRIM" value="-4000"/>
+    <define name="AUTO_THROTTLE_CLIMB_THROTTLE_INCREMENT" value="0.15" 
unit="%/(m/s)"/>
+    <define name="AUTO_THROTTLE_PGAIN" value="-0.01"/>
+    <define name="AUTO_THROTTLE_IGAIN" value="0.1"/>
+    <define name="AUTO_THROTTLE_PITCH_OF_VZ_PGAIN" value="0.05"/>
+
+    <define name="THROTTLE_SLEW_LIMITER" value="2" unit="s"/>
+  </section>
+
+  <section name="HORIZONTAL CONTROL" prefix="H_CTL_">
+    <define name="COURSE_PGAIN" value="-1.10800004005"/>
+
+    <define name="ROLL_MAX_SETPOINT" value="0.6" unit="radians"/>
+    <define name="PITCH_MAX_SETPOINT" value="0.5" unit="radians"/>
+    <define name="PITCH_MIN_SETPOINT" value="-0.5" unit="radians"/>
+
+    <define name="PITCH_PGAIN" value="-15184.5644531"/>
+    <define name="PITCH_DGAIN" value="1.5"/>
+
+    <define name="ELEVATOR_OF_ROLL" value="1250"/>
+
+    <define name="ROLL_SLEW" value="0.1"/>
+
+    <define name="ROLL_ATTITUDE_GAIN" value="-7500"/>
+    <define name="ROLL_RATE_GAIN" value="-1500"/>
+   </section>
+
+  <section name="NAV">
+    <define name="NAV_PITCH" value="0."/>
+    <define name="NAV_GLIDE_PITCH_TRIM" value="0"/>
+  </section>
+
+  <section name="AGGRESSIVE" prefix="AGR_">
+    <define name="BLEND_START" value="20"/><!-- Altitude Error to Initiate 
Aggressive Climb CANNOT BE ZERO!!-->
+    <define name="BLEND_END" value="10"/><!-- Altitude Error to Blend 
Aggressive to Regular Climb Modes  CANNOT BE ZERO!!-->
+    <define name="CLIMB_THROTTLE" value="1.00"/><!-- Gaz for Aggressive Climb 
-->
+    <define name="CLIMB_PITCH" value="0.3"/><!-- Pitch for Aggressive Climb -->
+    <define name="DESCENT_THROTTLE" value="0.1"/><!-- Gaz for Aggressive 
Decent -->
+    <define name="DESCENT_PITCH" value="-0.25"/><!-- Pitch for Aggressive 
Decent -->
+    <define name="CLIMB_NAV_RATIO" value="0.8"/><!-- Percent Navigation for 
Altitude Error Equal to Start Altitude -->
+    <define name="DESCENT_NAV_RATIO" value="1.0"/>
+    </section>
+
+  <section name="FAILSAFE" prefix="FAILSAFE_">
+    <define name="DELAY_WITHOUT_GPS" value="2" unit="s"/>
+    <define name="DEFAULT_THROTTLE" value="0.3" unit="%"/>
+    <define name="DEFAULT_ROLL" value="0.3" unit="rad"/>
+    <define name="DEFAULT_PITCH" value="0.5" unit="rad"/>
+  </section>
+
+  <firmware name="fixedwing">
+    <target name="sim"                         board="pc"/>
+    <target name="ap"                  board="tiny_0.99">
+      <define name="AGR_CLIMB" />
+      <define name="LOITER_TRIM" />
+      <define name="ALT_KALMAN" />
+    </target>
+
+    <subsystem name="radio_control" type="ppm"/>
+
+    <!-- Communication -->
+    <subsystem name="telemetry"        type="transparent">
+      <param name="MODEM_BAUD"                 value="B9600"/>
+    </subsystem>
+
+    <!-- Actuators -->
+    <subsystem name="actuators"        type="4015"/>
+
+    <!-- Sensors -->
+    <subsystem name="adc"           type="generic">
+      <param name="ADC_GENERIC1" value="ADC_7"/> <!-- current sensor -->
+    </subsystem>
+    <subsystem name="attitude"                 type="infrared"/>
+    <subsystem name="gps"                  type="ublox_lea4p"/>
+    <subsystem name="navigation"/>
+  </firmware>
+
+  <firmware name="setup">
+    <target name="tunnel"                  board="tiny_0.99" />
+    <target name="setup_actuators"     board="tiny_0.99" />
+  </firmware>
+
+</airframe>

Modified: paparazzi3/trunk/conf/boards/tiny_0.99.makefile
===================================================================
--- paparazzi3/trunk/conf/boards/tiny_0.99.makefile     2010-08-23 18:10:53 UTC 
(rev 5630)
+++ paparazzi3/trunk/conf/boards/tiny_0.99.makefile     2010-08-23 18:23:50 UTC 
(rev 5631)
@@ -9,4 +9,5 @@
 
 BOARD_CFG = \"tiny_0_99.h\"
 
-
+GPS_UART_NR    = 1
+MODEM_UART_NR = 0