[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[paparazzi-commits] [4516] looks like ppzuav now has a directory for its
|
From: |
antoine drouin |
|
Subject: |
[paparazzi-commits] [4516] looks like ppzuav now has a directory for its airframes |
|
Date: |
Sun, 31 Jan 2010 17:20:42 +0000 |
Revision: 4516
http://svn.sv.gnu.org/viewvc/?view=rev&root=paparazzi&revision=4516
Author: poine
Date: 2010-01-31 17:20:41 +0000 (Sun, 31 Jan 2010)
Log Message:
-----------
looks like ppzuav now has a directory for its airframes
Removed Paths:
-------------
paparazzi3/trunk/conf/airframes/booz2_a2p.xml
Deleted: paparazzi3/trunk/conf/airframes/booz2_a2p.xml
===================================================================
--- paparazzi3/trunk/conf/airframes/booz2_a2p.xml 2010-01-31 16:50:05 UTC
(rev 4515)
+++ paparazzi3/trunk/conf/airframes/booz2_a2p.xml 2010-01-31 17:20:41 UTC
(rev 4516)
@@ -1,207 +0,0 @@
-<airframe name="BOOZ2_A2">
-
- <servos min="0" neutral="0" max="0xff">
- <servo name="PITCH" no="0" min="0" neutral="0" max="255"/>
- <servo name="ROLL" no="1" min="0" neutral="0" max="255"/>
- <servo name="YAW" no="2" min="0" neutral="0" max="255"/>
- <servo name="THRUST" no="3" min="0" neutral="0" max="255"/>
- </servos>
-
- <commands>
- <axis name="PITCH" failsafe_value="0"/>
- <axis name="ROLL" failsafe_value="0"/>
- <axis name="YAW" failsafe_value="0"/>
- <axis name="THRUST" failsafe_value="0"/>
- </commands>
-
- <section name="IMU" prefix="IMU_">
-
- <define name="GYRO_P_CHAN" value="1"/>
- <define name="GYRO_Q_CHAN" value="0"/>
- <define name="GYRO_R_CHAN" value="2"/>
-
- <define name="GYRO_P_NEUTRAL" value="33008"/>
- <define name="GYRO_Q_NEUTRAL" value="31899"/>
- <define name="GYRO_R_NEUTRAL" value="32989"/>
-
- <define name="GYRO_P_SENS" value=" 1.01" integer="16"/>
- <define name="GYRO_Q_SENS" value="-1.01" integer="16"/>
- <define name="GYRO_R_SENS" value="-1.01" integer="16"/>
-
-
- <define name="ACCEL_X_CHAN" value="5"/>
- <define name="ACCEL_Y_CHAN" value="3"/>
- <define name="ACCEL_Z_CHAN" value="4"/>
-
- <define name="ACCEL_X_SENS" value="-2.19476868" integer="16"/>
- <define name="ACCEL_Y_SENS" value="-2.88368188" integer="16"/>
- <define name="ACCEL_Z_SENS" value="-2.57172803" integer="16"/>
-
- <define name="ACCEL_X_NEUTRAL" value="33160"/>
- <define name="ACCEL_Y_NEUTRAL" value="32523"/>
- <define name="ACCEL_Z_NEUTRAL" value="32418"/>
-
- <define name="MAG_X_CHAN" value="0"/>
- <define name="MAG_Y_CHAN" value="1"/>
- <define name="MAG_Z_CHAN" value="2"/>
-
- <define name="MAG_X_SENS" value="4.73914612" integer="16"/>
- <define name="MAG_Y_SENS" value="-5.34705586" integer="16"/>
- <define name="MAG_Z_SENS" value="-3.57580805" integer="16"/>
-
- <define name="MAG_X_NEUTRAL" value="-89"/>
- <define name="MAG_Y_NEUTRAL" value="20"/>
- <define name="MAG_Z_NEUTRAL" value="-30"/>
-
- <define name="BODY_TO_IMU_PHI" value="ANGLE_BFP_OF_REAL(RadOfDeg(0.))"/>
- <define name="BODY_TO_IMU_THETA" value="ANGLE_BFP_OF_REAL(RadOfDeg(0.))"/>
- <define name="BODY_TO_IMU_PSI" value="ANGLE_BFP_OF_REAL(RadOfDeg(0.))"/>
-
- </section>
-
-
- <section name="STABILIZATION_RATE" prefix="BOOZ_STABILIZATION_RATE_">
-
- <define name="SP_MAX_P" value="10000"/>
- <define name="SP_MAX_Q" value="10000"/>
- <define name="SP_MAX_R" value="10000"/>
-
- <define name="GAIN_P" value="-400"/>
- <define name="GAIN_Q" value="-400"/>
- <define name="GAIN_R" value="-350"/>
-
- </section>
-
- <section name="STABILIZATION_ATTITUDE" prefix="BOOZ_STABILIZATION_ATTITUDE_">
-
- <!-- setpoints -->
- <define name="SP_MAX_PHI" value="RadOfDeg(45.)"/>
- <define name="SP_MAX_THETA" value="RadOfDeg(45.)"/>
- <define name="SP_MAX_R" value="RadOfDeg(90.)"/>
- <define name="DEADBAND_R" value="250"/>
-
- <!-- reference -->
- <define name="REF_OMEGA_P" value="RadOfDeg(800)"/>
- <define name="REF_ZETA_P" value="0.85"/>
- <define name="REF_MAX_P" value="RadOfDeg(300.)"/>
- <define name="REF_MAX_PDOT" value="RadOfDeg(7000.)"/>
-
- <define name="REF_OMEGA_Q" value="RadOfDeg(800)"/>
- <define name="REF_ZETA_Q" value="0.85"/>
- <define name="REF_MAX_Q" value="RadOfDeg(300.)"/>
- <define name="REF_MAX_QDOT" value="RadOfDeg(7000.)"/>
-
- <define name="REF_OMEGA_R" value="RadOfDeg(500)"/>
- <define name="REF_ZETA_R" value="0.85"/>
- <define name="REF_MAX_R" value="RadOfDeg(180.)"/>
- <define name="REF_MAX_RDOT" value="RadOfDeg(1800.)"/>
-
- <!-- feedback -->
-
-<!--
- <define name="PHI_PGAIN" value="-400"/>
- <define name="PHI_DGAIN" value="-300"/>
- <define name="PHI_IGAIN" value="-100"/>
-
- <define name="THETA_PGAIN" value="-400"/>
- <define name="THETA_DGAIN" value="-300"/>
- <define name="THETA_IGAIN" value="-100"/>
-
- <define name="PSI_PGAIN" value="-380"/>
- <define name="PSI_DGAIN" value="-320"/>
- <define name="PSI_IGAIN" value="-75"/>
--->
-
- <define name="PHI_PGAIN" value="-2000"/>
- <define name="PHI_DGAIN" value="-400"/>
- <define name="PHI_IGAIN" value="-200"/>
-
- <define name="THETA_PGAIN" value="-2000"/>
- <define name="THETA_DGAIN" value="-400"/>
- <define name="THETA_IGAIN" value="-200"/>
-
- <define name="PSI_PGAIN" value="-1000"/>
- <define name="PSI_DGAIN" value="-350"/>
- <define name="PSI_IGAIN" value="-10"/>
-
- <!-- feedforward -->
- <define name="PHI_DDGAIN" value=" 300"/>
- <define name="THETA_DDGAIN" value=" 300"/>
- <define name="PSI_DDGAIN" value=" 300"/>
-
- </section>
-
- <section name="SUPERVISION" prefix="SUPERVISION_">
- <define name="TRIM_A" value="0"/>
- <define name="TRIM_E" value="6"/>
- <define name="TRIM_R" value="0"/>
- </section>
-
- <section name="INS" prefix="BOOZ_INS_">
- <define name="BARO_SENS" value="14.9" integer="16"/>
- </section>
-
-
- <section name="GUIDANCE_V" prefix="BOOZ2_GUIDANCE_V_">
-
- <define name="MIN_ERR_Z" value="POS_BFP_OF_REAL(-10.)"/>
- <define name="MAX_ERR_Z" value="POS_BFP_OF_REAL( 10.)"/>
- <define name="MIN_ERR_ZD" value="SPEED_BFP_OF_REAL(-10.)"/>
- <define name="MAX_ERR_ZD" value="SPEED_BFP_OF_REAL( 10.)"/>
- <define name="MAX_SUM_ERR" value="2000000"/>
- <define name="HOVER_KP" value="-500"/>
- <define name="HOVER_KD" value="-250"/>
- <define name="HOVER_KI" value="-100"/>
- <!-- SPEED_BFP_OF_REAL(1.5) / (MAX_PPRZ/2) -->
- <define name="RC_CLIMB_COEF" value ="163"/>
- <!-- SPEED_BFP_OF_REAL(1.5) * 20% -->
- <define name="RC_CLIMB_DEAD_BAND" value ="160000"/>
- </section>
-
- <section name="GUIDANCE_H" prefix="BOOZ2_GUIDANCE_H_">
- <define name="PGAIN" value="-100"/>
- <define name="DGAIN" value="-100"/>
- <define name="IGAIN" value="-0"/>
- </section>
-
- <section name="BAT">
- <define name="MILLIAMP_PER_PERCENT" value="0.86"/>
- <define name="CATASTROPHIC_BAT_LEVEL" value="9.3" unit="V"/>
- <define name="BATTERY_SENS" value="0.18" integer="16"/>
-<!-- <define name="BATTERY_SENS" value="1" integer="16"/>-->
- </section>
-
- <section name="AUTOPILOT">
- <define name="BOOZ2_MODE_MANUAL" value="BOOZ2_AP_MODE_ATTITUDE_DIRECT"/>
- <define name="BOOZ2_MODE_AUTO1" value="BOOZ2_AP_MODE_ATTITUDE_RC_CLIMB"/>
- <define name="BOOZ2_MODE_AUTO2" value="BOOZ2_AP_MODE_ATTITUDE_Z_HOLD"/>
- </section>
-
-
- <section name="MISC">
- <define name="BOOZ2_FACE_REINJ_1" value="1024"/>
- </section>
-
- <makefile>
-ARCH=lpc21
-BOARD_CFG = \"boards/booz2_v1_0.h\"
-
-# prevents motors from ever starting
-#ap.CFLAGS += -DKILL_MOTORS
-
-include $(PAPARAZZI_SRC)/conf/autopilot/booz2_common.makefile
-include $(CFG_BOOZ)/booz2_autopilot.makefile
-include $(CFG_BOOZ)/booz2_test_progs.makefile
-
-#ap.CFLAGS += -DMODEM_BAUD=B38400
-ap.CFLAGS += -DMODEM_BAUD=B57600
-include $(CFG_BOOZ)/subsystems/booz2_radio_control_ppm.makefile
-include $(CFG_BOOZ)/subsystems/booz2_actuators_asctec.makefile
-include $(CFG_BOOZ)/subsystems/booz2_imu_b2v1_1.makefile
-include $(CFG_BOOZ)/subsystems/booz2_gps.makefile
-
-include $(CFG_BOOZ)/subsystems/booz2_ahrs_cmpl.makefile
-
- </makefile>
-
-</airframe>
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [paparazzi-commits] [4516] looks like ppzuav now has a directory for its airframes,
antoine drouin <=