On Wed, Aug 23, 2017 at 05:45:43PM +0200, depuis wrote:
On Tue, 22 Aug 2017 15:10:22 +0200, Olaf Till wrote:
>>Calling dataframe_test, lines 191--193 (left division) didn't pass
for
>>me without specifying a tolerance...
Could you please tell me if the issue is still present ?
It seems so, with Octave-4.2.1:
FIXME -- should create a dataframe from the whole workspace
error: ASSERT errors for: assert ((x \ y).array,x.array \ y)
Location | Observed | Expected | Reason
(1,1) -1.7495 -1.7495 Abs err 4.4409e-16 exceeds
tol 0
(2,1) 0.25061 0.25061 Abs err 1.1102e-16 exceeds
tol 0
(3,1) -2.1271 -2.1271 Abs err 4.4409e-16 exceeds
tol 0
(1,2) 2.1156 2.1156 Abs err 4.4409e-16 exceeds
tol 0
(2,2) 0.50236 0.50236 Abs err 3.3307e-16 exceeds
tol 0
(3,2) 2.8777 2.8777 Abs err 4.4409e-16 exceeds
tol 0
(2,3) 0.053649 0.053649 Abs err 6.9389e-18 exceeds
tol 0
Makefile:221: recipe for target 'check' failed
with Octave-4.0.0 only this:
FIXME -- should create a dataframe from the whole workspace
error: ASSERT errors for: assert ((x \ y).array,x.array \ y)
Location | Observed | Expected | Reason
(1,1) 0.16759 0.16759 Abs err 5.5511e-17 exceeds
tol 0
(2,1) -1.2904 -1.2904 Abs err 4.4409e-16 exceeds
tol 0
(3,1) 0.27658 0.27658 Abs err 5.5511e-17 exceeds
tol 0
Makefile:221: recipe for target 'check' failed
>>You probably don't need to upload a further tarball, it should be
>>enough if I generate it at my machine after you've done the last
>>polish to dataframe_test.m
>>
The 'make release' fails in a strange way:
1) it generate the main tarball
2) it fails with the error message 'generate_html not installed'
The Makefile currently has the limitation that _locally_ installed
pre-requisite packages have to be installed _before_ 'make install'
and 'make release'.
To solve the problem, first install generate_html in the usual way,
the type 'make install' and then 'make release'. ('make release'
alone
won't re-install the package, unless you delete target/ first).