[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: problem with docs (Was: make check?)
From: |
Tatsuro MATSUOKA |
Subject: |
Re: problem with docs (Was: make check?) |
Date: |
Mon, 11 Jul 2016 18:11:26 +0900 (JST) |
----- Original Message -----
> From: Ben Abbott
> To: Octave Maintainers List ; Mike Miller
> Cc:
> Date: 2016/7/11, Mon 10:25
> Subject: Re: problem with docs (Was: make check?)
>
>
>> On Jul 10, 2016, at 8:33 PM, Ben Abbott <address@hidden> wrote:
>>
>>> On Jul 10, 2016, at 8:09 AM, Ben Abbott <address@hidden> wrote:
>>>
>>> I tried “make check” for the default branch and encountered the error
> below.
>>>
>>> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>>> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/test/--no-init-path'
>>> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/test/--no-init-path'
>>> error: execution exception in --no-init-path
>>>
>>> Is anyone else seeing this?
>>>
>>> $ hg tip
>>> pulling from /Users/bpabbott/Development/mercurial/octave
>>> searching for changes
>>> no changes found
>>> changeset: 22081:a5a99a830c8c
>>> bookmark: @
>>> tag: tip
>>> user: Mike Miller <address@hidden>
>>> date: Thu Jul 07 13:55:37 2016 -0700
>>> summary: Set default floating point unit state when initializing
> the interpreter (bug #48418)
>>>
>>> Ben
>>
>> Ok. My mistake. It’s not “make check” that fails. I’m just no longer able
> to build the docs.
>>
>> I suspect a problem with the changeset below.
>>
>> http://hg.savannah.gnu.org/hgweb/octave/rev/df50d42d4b1b
>>
>> I’m not building in the source tree, but have started a build to see if
> that works.
>>
>> The warnings/errors I see are below.
>>
>> GEN doc/interpreter/voronoi.txt
>> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>> error: execution exception in --no-init-path
>>
>> <snip> </snip>
>>
>> GEN doc/interpreter/plot-uitoggletoolproperties.texi
>> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>> error: execution exception in --no-init-path
>>
>> <snip> </snip>
>>
>> MAKEINFO ../sources/doc/interpreter/octave.info
>> doc/interpreter/plot.texi:102: warning: could not find @image file
> `plot.txt' nor alternate text
>> doc/interpreter/plot.texi:422: warning: could not find @image file
> `hist.txt' nor alternate text
>> doc/interpreter/plot.texi:1308: warning: could not find @image file
> `errorbar.txt' nor alternate text
>> doc/interpreter/plot.texi:1576: warning: could not find @image file
> `polar.txt' nor alternate text
>> doc/interpreter/plot.texi:2577: warning: could not find @image file
> `mesh.txt' nor alternate text
>> doc/interpreter/plot.texi:2600: warning: could not find @image file
> `plot3.txt' nor alternate text
>> doc/interpreter/sparse.texi:671: warning: could not find @image file
> `spmatrix.txt' nor alternate text
>> doc/interpreter/sparse.texi:1052: warning: could not find @image file
> `spmatrix.txt' nor alternate text
>> doc/interpreter/sparse.texi:1104: warning: could not find @image file
> `spchol.txt' nor alternate text
>> doc/interpreter/sparse.texi:1109: warning: could not find @image file
> `spcholperm.txt' nor alternate text
>>
>> <snip> </snip>
>>
>> GEN doc/interpreter/doc-cache
>> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>> error: execution exception in --no-init-path
>>
>> <snip> </snip>
>>
>> GEN doc/interpreter/voronoi.eps
>> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>> error: execution exception in --no-init-path
>>
>> <snip> </snip>
>>
>> GEN doc/interpreter/splinefit6.eps
>> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
>> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/build/--no-init-path'
>> error: execution exception in --no-init-path
>> TEXI2DVI doc/interpreter/octave.dvi
>> /sw/bin/texi2dvi: etex exited with bad status, quitting.
>> Makefile:27464: recipe for target 'doc/interpreter/octave.dvi’ failed
>>
>> Ben
>
> lol, I tried building in the source tree. The result has the same errors as
> before and some a new “feature”.
>
> GEN doc/interpreter/triplot.txt
> wwaarrnniinngg:: ddooccssttrriinngg ffiillee
> ''//ssww//llooccaall//sshhaarree//ooccttaavvee//44..11..00++//eettcc//bbuuiilltt--iinn--ddooccssttrriinnggss''
>
> nnoott ffoouunndd
>
> eerrrroorr:: nnoo ssuucchh ffiillee,,
> ''//UUsseerrss//bbppaabbbbootttt//DDeevveellooppmmeenntt//mmeerrccuurriiaall//ddeeffaauulltt//ssoouurrcceess//----nnoo--iinniitt--ppaatthh''
>
> eerrrroorr:: ssoouurrccee:: eerrrroorr ssoouurrcciinngg ffiillee
> ''//UUsseerrss//bbppaabbbbootttt//DDeevveellooppmmeenntt//mmeerrccuurriiaall//ddeeffaauulltt//ssoouurrcceess//----nnoo--iinniitt--ppaatthh''
>
> eerrrroorr:: eexxeeccuuttiioonn eexxcceeppttiioonn iinn
> ----nnoo--iinniitt--ppaatthh
>
> GEN doc/interpreter/griddata.txt
> GEN doc/interpreter/convhull.txt
> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
> error: execution exception in --no-init-path
> warning: docstring file
> '/sw/local/share/octave/4.1.0+/etc/built-in-docstrings' not found
> error: no such file,
> '/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
> error: source: error sourcing file
> '/Users/bpabbott/Development/mercurial/default/sources/--no-init-path'
> error: execution exception in --no-init-path
>
> Ben
I have pulled and updated the hg clone in my ubuntu 14.04 PC (amd64),
and bootstrap, re-configure and make.
All build process including make documents went well.
Revision : 22084:79ee6df71b51
bookmark : @
tag : tip
user : Mike Miller <address@hidden>
date : Sun Jul 10 11:02:44 2016 -0700
file : liboctave/wrappers/fpucw-wrappers.c
explanation:
Fix compilation error in fpucw-wrappers.c on non-x86 systems
* fpucw-wrappers.c (octave_begin_long_double_rounding): Declare the oldcw
variable used by BEGIN_LONG_DOUBLE_ROUNDING unconditionally since its value
is returned unconditionally.
HG ID for this build is "79ee6df71b51"
Tatsuro
- make check?, Ben Abbott, 2016/07/10
- Re: make check?, Dmitri A. Sergatskov, 2016/07/10
- Re: make check?, Mike Miller, 2016/07/10
- Re: problem with docs (Was: make check?), Ben Abbott, 2016/07/10
- Re: problem with docs (Was: make check?), Ben Abbott, 2016/07/10
- Re: problem with docs (Was: make check?),
Tatsuro MATSUOKA <=
- Re: problem with docs (Was: make check?), Mike Miller, 2016/07/11
- Re: problem with docs (Was: make check?), Ben Abbott, 2016/07/11
- Re: problem with docs (Was: make check?), Mike Miller, 2016/07/12
- Re: problem with docs (Was: make check?), Ben Abbott, 2016/07/12
- Re: problem with docs (Was: make check?), Mike Miller, 2016/07/14
- Re: problem with docs (Was: make check?), Ben Abbott, 2016/07/14