[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: mkoctfile urgently needs attention before Octave 3.6.0
From: |
Lukas Reichlin |
Subject: |
Re: mkoctfile urgently needs attention before Octave 3.6.0 |
Date: |
Thu, 29 Dec 2011 22:57:05 +0100 |
On 29.12.2011, at 22:07, Lukas Reichlin wrote:
> On 29.12.2011, at 21:57, c. wrote:
>
>>
>> On 29 Dec 2011, at 21:46, Lukas Reichlin wrote:
>>
>>> Hmm, I'm not sure about this. Interestingly, it works if I use
>>>
>>> "$(mkoctfile -p BLAS_LIBS)"
>>>
>>> in my developer makefiles alone.
>>
>> How exactly did you add that to your Makefile? If I use:
>>
>> # balanced stochastic truncation model reduction
>> slab09hd.oct: slab09hd.cc
>> mkoctfile $$(mkoctfile -p BLAS_LIBS) slab09hd.cc \
>> AB09HD.f TB01ID.f AB04MD.f TB01KD.f AB09HY.f \
>> AB09IX.f MB03UD.f SB02MD.f AB09DD.f TB01LD.f \
>> SB03OU.f MA02AD.f MB03QX.f select.f SB03OT.f \
>> SB02MR.f SB02MS.f MB03QD.f SB02MU.f SB02MV.f \
>> SB02MW.f MB04ND.f MB04OD.f MB03QY.f SB03OR.f \
>> SB03OY.f SB04PX.f MB04NY.f MB04OY.f SB03OV.f
>>
>> I get the following error:
>>
>> $ make slab09hd.oct
>> mkoctfile $(mkoctfile -p BLAS_LIBS) slab09hd.cc \
>> AB09HD.f TB01ID.f AB04MD.f TB01KD.f AB09HY.f \
>> AB09IX.f MB03UD.f SB02MD.f AB09DD.f TB01LD.f \
>> SB03OU.f MA02AD.f MB03QX.f select.f SB03OT.f \
>> SB02MR.f SB02MS.f MB03QD.f SB02MU.f SB02MV.f \
>> SB02MW.f MB04ND.f MB04OD.f MB03QY.f SB03OR.f \
>> SB03OY.f SB04PX.f MB04NY.f MB04OY.f SB03OV.f
>> mkoctfile: unrecognized argument -framework
>> make: *** [slab09hd.oct] Error 1
>>
>> c.
>
> That looks like a makefile from my upcoming order reduction functions
> (currently located under extra/control-devel). I didn't test these. Below is
> one from main/control, makefile_chol.m:
>
> ==============================================================================
> ## Developer Makefile for OCT-files
> ##
> ==============================================================================
> ## USAGE: * fetch control from Octave-Forge by svn
> ## * add control/inst, control/src and control/devel to your Octave
> path
> ## * run makefile_*
> ##
> ==============================================================================
>
> homedir = pwd ();
> develdir = fileparts (which ("makefile_chol"));
> srcdir = [develdir, "/../src"];
> cd (srcdir);
>
> mkoctfile slsb03od.cc \
> SB03OD.f select.f SB03OU.f SB03OT.f MB04ND.f \
> MB04OD.f SB03OR.f SB03OY.f SB04PX.f MB04NY.f \
> MB04OY.f SB03OV.f \
> "$(mkoctfile -p LAPACK_LIBS)" \
> "$(mkoctfile -p BLAS_LIBS)"
>
>
> mkoctfile slsg03bd.cc \
> SG03BD.f SG03BV.f SG03BU.f SG03BW.f SG03BX.f \
> SG03BY.f MB02UU.f MB02UV.f \
> "$(mkoctfile -p LAPACK_LIBS)" \
> "$(mkoctfile -p BLAS_LIBS)"
>
> system ("rm *.o");
> cd (homedir);
>
> I compiled your modified Portfile without problems. The makefile pasted above
> works as well which is a very good sign! I'll modify the other makefiles and
> report back as soon as I'm finished.
>
> Cheers,
> Lukas
>
OK, I tested all developer makefiles with
"$(mkoctfile -p LAPACK_LIBS)" \
"$(mkoctfile -p BLAS_LIBS)"
and it worked for both the +accelerate and the +atlas option of the Portfile.
They are in the all the "devel" folder [1].
Then I restored the package makefile [2] to Marco Atzeris original patch, which
should do the same as my developer makefiles. But interestingly, both
+accelerate and +atlas fail with the same error when I download the package
from [3] and try to install it:
octave:1> pkg install control*
Undefined symbols for architecture x86_64:
"_lsame_", referenced from:
_ab08nd_ in AB08ND.o
_tb01id_ in TB01ID.o
"_ilaenv_", referenced from:
_ab08nd_ in AB08ND.o
_ab08nx_ in AB08NX.o
"_dlacpy_", referenced from:
_ab08nd_ in AB08ND.o
"_dlamch_", referenced from:
_ab08nd_ in AB08ND.o
_tb01id_ in TB01ID.o
"_dlange_", referenced from:
_ab08nd_ in AB08ND.o
"_dcopy_", referenced from:
_ab08nd_ in AB08ND.o
_mb03py_ in MB03PY.o
"_dlaset_", referenced from:
_ab08nd_ in AB08ND.o
_ab08nx_ in AB08NX.o
"_dtzrzf_", referenced from:
_ab08nd_ in AB08ND.o
"_dormrz_", referenced from:
_ab08nd_ in AB08ND.o
"_dlarfg_", referenced from:
_ab08nx_ in AB08NX.o
_mb03oy_ in MB03OY.o
_mb03py_ in MB03PY.o
"_dlatzm_", referenced from:
_ab08nx_ in AB08NX.o
"_dormrq_", referenced from:
_ab08nx_ in AB08NX.o
"_dlapmt_", referenced from:
_ab08nx_ in AB08NX.o
"_dormqr_", referenced from:
_ab08nx_ in AB08NX.o
"_dasum_", referenced from:
_tb01id_ in TB01ID.o
"_idamax_", referenced from:
_tb01id_ in TB01ID.o
_mb03oy_ in MB03OY.o
_mb03py_ in MB03PY.o
"_dscal_", referenced from:
_tb01id_ in TB01ID.o
_mb03oy_ in MB03OY.o
_mb03py_ in MB03PY.o
"_dnrm2_", referenced from:
_mb03oy_ in MB03OY.o
_mb03py_ in MB03PY.o
"_dswap_", referenced from:
_mb03oy_ in MB03OY.o
_mb03py_ in MB03PY.o
"_dlaic1_", referenced from:
_mb03oy_ in MB03OY.o
_mb03py_ in MB03PY.o
"_dlarf_", referenced from:
_mb03oy_ in MB03OY.o
_mb03py_ in MB03PY.o
"_dggev_", referenced from:
Fslab08nd(octave_value_list const&, int) in slab08nd.o
ld: symbol(s) not found for architecture x86_64
collect2: ld returned 1 exit status
make: *** [slab08nd.oct] Error 1
'make' returned the following error: mkoctfile slab08nd.cc \
AB08ND.f AB08NX.f TB01ID.f MB03OY.f MB03PY.f \
error: called from `pkg>configure_make' in file
/opt/local/share/octave/3.5.91/m/pkg/pkg.m near line 1385, column 9
error: called from:
error: /opt/local/share/octave/3.5.91/m/pkg/pkg.m at line 827, column 5
error: /opt/local/share/octave/3.5.91/m/pkg/pkg.m at line 383, column 9
octave:1>
As Marco reported earlier, his patch works on Windows and some Linux flavours.
Mac is apparently a different story.
Lukas
[1]
http://octave.svn.sourceforge.net/viewvc/octave/trunk/octave-forge/main/control/devel/
[2]
http://octave.svn.sourceforge.net/viewvc/octave/trunk/octave-forge/main/control/src/Makefile?revision=9482&view=markup
[3]
http://octave.svn.sourceforge.net/viewvc/octave/trunk/octave-forge/main/control/?view=tar
- Re: mkoctfile urgently needs attention before Octave 3.6.0, c., 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, Lukas Reichlin, 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, c., 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, Lukas Reichlin, 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, c., 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, Lukas Reichlin, 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, c., 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0,
Lukas Reichlin <=
- Re: mkoctfile urgently needs attention before Octave 3.6.0, c., 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, Lukas Reichlin, 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, marco atzeri, 2011/12/30
- Re: mkoctfile urgently needs attention before Octave 3.6.0, Jordi GutiƩrrez Hermoso, 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, c., 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, Carlo de Falco, 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, Jordi GutiƩrrez Hermoso, 2011/12/29
- Re: mkoctfile urgently needs attention before Octave 3.6.0, c., 2011/12/29