[Net::FTPServer] Fwd: FAIL Net-FTPServer-1.122 x86_64-linux-thread-multi-ld 2.6.22.10

[Richard Jones]

----- Forwarded message from address@hidden -----

Subject: FAIL Net-FTPServer-1.122 x86_64-linux-thread-multi-ld 2.6.22.10
From: address@hidden
To: address@hidden
Cc: address@hidden
X-Reported-Via: Test::Reporter 1.38, via CPAN::Reporter 1.11
X-Scanned-By: MIMEDefang 2.63 on 10.0.0.1
X-Virus-Scanned: ClamAV 0.92.1/6204/Wed Mar 12 04:43:31 2008 on rinse.wov.idv.tw
X-Virus-Status: Clean
X-Virus-Checked: Checked
X-Old-Spam-Check-By: 16.mx.develooper.com
X-Old-Spam-Status: No, hits=-6.6 required=8.0
        tests=BAYES_00,PERLBUG_CONF,SPF_HELO_PASS,SPF_PASS

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to address@hidden to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Richard Jones,
    
This is a computer-generated report for Net-FTPServer-1.122
on perl 5.10.0, created by CPAN-Reporter-1.11. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/opt/perl/5.10.0/bin/perl Makefile.PL':

Checking for optional module Archive::Zip >= 0.11 ... not found.

*** Archive::Zip is missing. This module is required if you want to
enable archive mode, which allows users to create ZIP files on
the fly from directories on the server.

Checking for recommended module Authen::PAM >= 0.12 ... not found.

*** Authen::PAM is missing. This module is required in order to
perform user authentication against the full FTP server
personality on most Unix platforms. Therefore unless you install
this module, normal FTP server configurations will most likely
not work.

Checking for highly recommended module BSD::Resource ... not found.

*** BSD::Resource is missing. This module is required in order to
place limits on the size of the FTP server process. Without this
module, the FTP server will still work, but it will be vulnerable
to certain sorts of denial of service (DoS) attacks.

Checking for required module Carp ... ok.
Checking for optional module Compress::Zlib >= 1.14 ... ok.
Checking for optional module DBI ... not found.

*** DBI is missing. This module is required to run the test suite,
and also if you want to run the FTP server against a PostgreSQL
database.

Checking for optional module Digest::MD5 ... ok.
Checking for required module DynaLoader ... ok.
Checking for required module Fcntl ... ok.
Checking for optional module File::Sync ... not found.

*** File::Sync is missing. The SITE SYNC command will not work.

Checking for option module File::Temp ... ok.
Checking for required module Getopt::Long ... ok.
Checking for required module IO::Dir ... ok.
Checking for required module IO::File ... ok.
Checking for required module IO::Handle ... ok.
Checking for required module IO::Scalar >= 1.126 ... not found.

This module is provided by the IO-stringy package.

Checking for required module IO::Seekable ... ok.
Checking for required module IO::Select ... ok.
Checking for required module IO::Socket ... ok.
Checking for required module IPC::Open2 ... ok.
Checking for optional module Net::FTP ... ok.
Checking for required module POSIX ... ok.
Checking for required module Socket ... ok.
Checking for required module Sys::Hostname ... ok.
Checking for required module Sys::Syslog ... ok.

Obtain missing modules from CPAN [http://www.cpan.org/].

Required modules are missing. Install these first.


------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = 
/home/imacat/.cpan/build/Net-Radius-1.56-T33_qR/blib/arch:/home/imacat/.cpan/build/Net-Radius-1.56-T33_qR/blib/lib:/home/imacat/.cpan/build/Test-Warn-0.10-n0EEtR/blib/arch:/home/imacat/.cpan/build/Test-Warn-0.10-n0EEtR/blib/lib:/home/imacat/.cpan/build/Tree-DAG_Node-1.06-X5QW5K/blib/arch:/home/imacat/.cpan/build/Tree-DAG_Node-1.06-X5QW5K/blib/lib:/home/imacat/.cpan/build/Array-Compare-1.15-FedCht/blib/arch:/home/imacat/.cpan/build/Array-Compare-1.15-FedCht/blib/lib:/home/imacat/.cpan/build/Test-Exception-0.27-5Qrpf2/blib/arch:/home/imacat/.cpan/build/Test-Exception-0.27-5Qrpf2/blib/lib:/home/imacat/.cpan/build/Sub-Uplevel-0.1901-jCLw3M/blib/arch:/home/imacat/.cpan/build/Sub-Uplevel-0.1901-jCLw3M/blib/lib:/home/imacat/.cpan/build/NetAddr-IP-4.007-17rkjH/blib/arch:/home/imacat/.cpan/build/NetAddr-IP-4.007-17rkjH/blib/lib:/home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 15865
    PERL5_CPAN_IS_EXECUTING = 
/home/imacat/.cpan/build/Net-FTPServer-1.122-GKV4_W/Makefile.PL
    PERL5_CPAN_IS_RUNNING = 15865
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/zsh
    TERM = xterm

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.22     
    ExtUtils::Command   1.13     
    ExtUtils::Install   1.50     
    ExtUtils::MakeMaker 6.44     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19     
    File::Spec          3.2701   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.10     
    Test::More          0.78     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 
gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 
-Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid 
-Dinc_version_list=none -Duseshrplib=true address@hidden'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING 
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE 
-D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe 
-I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', 
gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', 
lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E 
-Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'

----- End forwarded message -----

-- 
Richard Jones
Red Hat