| BTW. I can't access status or summary either it gives me an: monit: cannot read status from the monit daemon
Den 18/04/2013 kl. 14.59 skrev Niels Kristian Schjødt < address@hidden>: Hi, I have monit setup for monitoring some background workers in my rails project. Whenever I deploy new code, monit should take care of restarting them after they are shut down. But every time I deploy, monit only starts up half of them. If I ssh into the server though and run "sudo monit validate" then it correctly sees that they are not running, and spins them up. But if I don't run that command manually, then nothing happens. What could be wrong, I have no idea how to debug it further?
Here is my configs:
############################## Monitrc #################################
set daemon 10
set logfile /var/log/monit.log
set idfile /var/lib/monit/id
set statefile /var/lib/monit/state
set eventqueue
basedir /var/lib/monit/events
slots 100
set eventqueue basedir /var/monit/ slots 1000
set mmonit http://monit:address@hidden:8080/collector
set httpd port 2812 and use address 192.168.0.3
allow localhost
allow 192.168.0.1
allow user:password
check system master-worker-server
if loadavg(5min) > 4 for 60 cycles then alert
if memory > 75% for 60 cycles then alert
if cpu(user) > 75% for 60 cycles then alert
include /etc/monit/conf.d/*
############################# /etc/monit/conf.d/sidekiq.conf ######################################
# Check for Ruby sidekiq worker process
check process da_workers-0.pid with pidfile /home/deployer/apps/au/shared/pids/workers/da_workers-0.pid
start program = "/bin/bash -l -c 'HOME=/home/deployer PATH=$HOME/.rbenv/shims:$HOME/.rbenv/bin:$PATH RAILS_ENV=production && cd /home/deployer/apps/au/current ; nohup bundle exec sidekiq -e production -C /home/deployer/apps/au/shared/config/workers/da_workers.yml -i 0 -P /home/deployer/apps/au/shared/pids/workers/da_workers-0.pid >> /home/deployer/apps/au/current/log/sidekiq.log 2>&1 &'" as uid deployer and gid deployer with timeout 250 seconds
stop program = "/bin/bash -l -c 'HOME=/home/deployer PATH=$HOME/.rbenv/shims:$HOME/.rbenv/bin:$PATH RAILS_ENV=production && if [ -d /home/deployer/apps/au/current ] && [ -f /home/deployer/apps/au/shared/pids/workers/da_workers-0.pid ] && kill -0 `cat /home/deployer/apps/au/shared/pids/workers/da_workers-0.pid`> /dev/null 2>&1; then cd /home/deployer/apps/au/current && bundle exec sidekiqctl stop /home/deployer/apps/au/shared/pids/workers/da_workers-0.pid 3 ; else echo 'Sidekiq is not running' ; fi'" as uid deployer and gid deployer with timeout 120 seconds
if cpu usage > 50% for 18 cycles then restart
if mem > 1200.0 MB for 18 cycles then restart
if 3 restarts within 18 cycles then timeout
check process da_data_maintenance_workers-0.pid with pidfile /home/deployer/apps/au/shared/pids/workers/da_data_maintenance_workers-0.pid
start program = "/bin/bash -l -c 'HOME=/home/deployer PATH=$HOME/.rbenv/shims:$HOME/.rbenv/bin:$PATH RAILS_ENV=production && cd /home/deployer/apps/au/current ; nohup bundle exec sidekiq -e production -C /home/deployer/apps/au/shared/config/workers/da_data_maintenance_workers.yml -i 0 -P /home/deployer/apps/au/shared/pids/workers/da_data_maintenance_workers-0.pid >> /home/deployer/apps/au/current/log/sidekiq.log 2>&1 &'" as uid deployer and gid deployer with timeout 250 seconds
stop program = "/bin/bash -l -c 'HOME=/home/deployer PATH=$HOME/.rbenv/shims:$HOME/.rbenv/bin:$PATH RAILS_ENV=production && if [ -d /home/deployer/apps/au/current ] && [ -f /home/deployer/apps/au/shared/pids/workers/da_data_maintenance_workers-0.pid ] && kill -0 `cat /home/deployer/apps/au/shared/pids/workers/da_data_maintenance_workers-0.pid`> /dev/null 2>&1; then cd /home/deployer/apps/au/current && bundle exec sidekiqctl stop /home/deployer/apps/au/shared/pids/workers/da_data_maintenance_workers-0.pid 3 ; else echo 'Sidekiq is not running' ; fi'" as uid deployer and gid deployer with timeout 120 seconds
if cpu usage > 50% for 18 cycles then restart
if mem > 1200.0 MB for 18 cycles then restart
if 3 restarts within 18 cycles then timeout
check process da_data_collecting_workers-0.pid with pidfile /home/deployer/apps/au/shared/pids/workers/da_data_collecting_workers-0.pid
start program = "/bin/bash -l -c 'HOME=/home/deployer PATH=$HOME/.rbenv/shims:$HOME/.rbenv/bin:$PATH RAILS_ENV=production && cd /home/deployer/apps/au/current ; nohup bundle exec sidekiq -e production -C /home/deployer/apps/au/shared/config/workers/da_data_collecting_workers.yml -i 0 -P /home/deployer/apps/au/shared/pids/workers/da_data_collecting_workers-0.pid >> /home/deployer/apps/au/current/log/sidekiq.log 2>&1 &'" as uid deployer and gid deployer with timeout 250 seconds
stop program = "/bin/bash -l -c 'HOME=/home/deployer PATH=$HOME/.rbenv/shims:$HOME/.rbenv/bin:$PATH RAILS_ENV=production && if [ -d /home/deployer/apps/au/current ] && [ -f /home/deployer/apps/au/shared/pids/workers/da_data_collecting_workers-0.pid ] && kill -0 `cat /home/deployer/apps/au/shared/pids/workers/da_data_collecting_workers-0.pid`> /dev/null 2>&1; then cd /home/deployer/apps/au/current && bundle exec sidekiqctl stop /home/deployer/apps/au/shared/pids/workers/da_data_collecting_workers-0.pid 3 ; else echo 'Sidekiq is not running' ; fi'" as uid deployer and gid deployer with timeout 120 seconds
if cpu usage > 50% for 18 cycles then restart
if mem > 1200.0 MB for 18 cycles then restart
if 3 restarts within 18 cycles then timeout
check process da_data_collecting_workers-1.pid with pidfile /home/deployer/apps/au/shared/pids/workers/da_data_collecting_workers-1.pid
start program = "/bin/bash -l -c 'HOME=/home/deployer PATH=$HOME/.rbenv/shims:$HOME/.rbenv/bin:$PATH RAILS_ENV=production && cd /home/deployer/apps/au/current ; nohup bundle exec sidekiq -e production -C /home/deployer/apps/au/shared/config/workers/da_data_collecting_workers.yml -i 1 -P /home/deployer/apps/au/shared/pids/workers/da_data_collecting_workers-1.pid >> /home/deployer/apps/au/current/log/sidekiq.log 2>&1 &'" as uid deployer and gid deployer with timeout 250 seconds
stop program = "/bin/bash -l -c 'HOME=/home/deployer PATH=$HOME/.rbenv/shims:$HOME/.rbenv/bin:$PATH RAILS_ENV=production && if [ -d /home/deployer/apps/au/current ] && [ -f /home/deployer/apps/au/shared/pids/workers/da_data_collecting_workers-1.pid ] && kill -0 `cat /home/deployer/apps/au/shared/pids/workers/da_data_collecting_workers-1.pid`> /dev/null 2>&1; then cd /home/deployer/apps/au/current && bundle exec sidekiqctl stop /home/deployer/apps/au/shared/pids/workers/da_data_collecting_workers-1.pid 3 ; else echo 'Sidekiq is not running' ; fi'" as uid deployer and gid deployer with timeout 120 seconds
if cpu usage > 50% for 18 cycles then restart
if mem > 1200.0 MB for 18 cycles then restart
if 3 restarts within 18 cycles then timeout
|