On Wed, Mar 14, 2012 at 11:07 AM, Callum Macdonald
<address@hidden> wrote:
I have this within my /etc/monit/conf.d/apache.mon file:
check process apache with pidfile /var/run/apache2.pid
if failed host 10.0.0.1 port 80 protocol http
and request '/path/to/file.html'
with hostheader 'example.tld'
with checksum aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaf
for 2 cycles
then restart
Then `sudo monit -t` produces:
/etc/monit/conf.d/apache.mon:5: Error: syntax error 'checksum'
With either hostheader OR checksum, tI get syntax ok. But with both, I
always get an error on one or the other.
I'm struggling to figure out what the issue is. I've been over the docs
for this section again and again. The manual says:
PROTO(COL) HTTP [REQUEST {"/path"} [with HOSTHEADER "string"] [with
CHECKSUM checksum]
if failed host 192.168.1.100 port 8080 protocol http
and request '/testing' hostheader 'example.com'
with timeout 20 seconds for 2 cycles
then alert
What am I missing? How do I use both hostheader and checksum?
Cheers - Callum.
==
Callum Macdonald
Morocco mobile: +212 652 060 089
UK mobile: +44 7968 378 810
Desk: +44 845 126 0875
www.callum-macdonald.com
--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general