monit-general
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Check Host in MONIT


From: Paul Sun
Subject: RE: Check Host in MONIT
Date: Mon, 11 Apr 2011 21:27:17 +0800

Should I use "if succeeded" or "if passed"?

BTW, I noticed that the monit is core dumped before, anything can help
to check?

- PS

-----Original Message-----
From: address@hidden
[mailto:address@hidden On
Behalf Of Martin Pala
Sent: Monday, 11 April, 2011 21:23
To: This is the general mailing list for monit
Subject: Re: Check Host in MONIT

Yes, this setup is possible - the recovery/succeeded action will be
executed only on failure->success change however (if the service was up
when monit started, no action is done). You can check logs to see
whether the action was executed on service recovery.

Regards,
Martin

On Apr 10, 2011, at 3:16 PM, Paul Sun wrote:

> Hi 
> 
> I would like to know whether monit support to action if the check host
> is success? I tried below configuration, but doesn't seems work
> 
> - PS
> 
>  check host SERVER1 with address 10.219.35.80
>    if failed icmp type echo count 3 with timeout 3 seconds then alert
>    if failed port 2054 then exec "/user/scripts/set_alarm.sh"
>        else if succeeded then exec "/user/scripts/clear_alarm.sh"
> 
> --
> To unsubscribe:
> http://lists.nongnu.org/mailman/listinfo/monit-general


--
To unsubscribe:
http://lists.nongnu.org/mailman/listinfo/monit-general



reply via email to

[Prev in Thread] Current Thread [Next in Thread]