[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [monit] Re: started twice
From: |
Nick Upson |
Subject: |
Re: [monit] Re: started twice |
Date: |
Wed, 14 Nov 2007 15:49:57 +0000 |
I now have a verbose log showing the problem, this is now using 4.10,
where should I send it
On 11/10/2007, Martin Pala <address@hidden> wrote:
> Can you run monit in verbose mode (-v option) and provide logs?
>
> Which monit version is it?
>
> Thanks,
> Martin
>
> Nick Upson wrote:
> > I have monitoring a process called bs1, yesterday I had a problem
> > which I traced back to having 2 copies running at the same time (as it
> > talks down a serial line that caused problems).
> >
> > The monit log shows it starting one copy at 16:58 and starting it
> > again at 17:00.
> > Normally monit looks after everything fine on this system which has
> > been used for several weeks, the config entry is below
> >
> > check process bs1 with pidfile "/var/run/bs1.pid"
> > start program = "/opt/unb/bin/bs.sh 1 restart"
> > stop program = "/opt/unb/bin/bs.sh 1 stop"
> > if totalmem > 1000 Mb then
> > exec "/bin/bash -c '/bin/echo bs1: memory alert >>
> > /tmp/monit;/opt/unb/bin/dblog_put.sh monit /tmp/monit'"
> > if cpu usage > 95% for 3 cycles then
> > exec "/bin/bash -c '/bin/echo bs1: cpu usage alert >>
> > /tmp/monit;/opt/unb/bin/dblog_put.sh monit /tmp/monit'"
> >
> >
> > --
> > To unsubscribe:
> > http://lists.nongnu.org/mailman/listinfo/monit-general
>
>
> --
> To unsubscribe:
> http://lists.nongnu.org/mailman/listinfo/monit-general
>
- Re: [monit] Re: started twice,
Nick Upson <=
- Re: [monit] Re: started twice, Martin Pala, 2007/11/14
- Re: [monit] Re: started twice, Nick Upson, 2007/11/15
- Re: [monit] Re: started twice, Martin Pala, 2007/11/15
- Re: [monit] Re: started twice, Nick Upson, 2007/11/16
- Re: [monit] Re: started twice, Martin Pala, 2007/11/16
- Re: [monit] Re: started twice, Nick Upson, 2007/11/20
- Re: [monit] Re: started twice, Nick Upson, 2007/11/30