You set "allow localhost" but are using "10.0.1.103:2812", which won't work because of the localhost ACL ... you should thus either modify the ACL or use localhost:2812 to access monit http interface.
Hi!
Now I have overcome syntax errors but it still doesn't show me monit at out 10.0.1.103:2812 address, instead it shows just blank white page. Something is still wrong with my conf file I think.
Con file looks like:
###############################################################################
## Monit control file
###############################################################################
##
## Comments begin with a '#' and extend through the end of the line. Keywords
## are case insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/'.
##
## Bellow is the example of some frequently used statements. For information
## about the control file, a complete list of statements and options please
## have a look in the monit manual.
##
##
###############################################################################
## Global section
###############################################################################
##
## Start monit in background (run as daemon) and check the services at 2-minute
## intervals.
#
set daemon 60
#
#
## Set syslog logging with the 'daemon' facility. If the FACILITY option is
## omited, monit will use 'user' facility by default. You can specify the
## path to the file for monit native logging.
#
set logfile syslog facility log_daemon
#
#
## Set list of mailservers for alert delivery. Multiple servers may be
## specified using comma separator. By default monit uses port 25 - it is
## possible to override it with the PORT option.
#
# set mailserver mail.bar.baz, # primary mailserver
# backup.bar.baz port 10025, # backup mailserver on port 10025
# localhost # fallback relay
set mailserver localhost
#
## By default monit will drop the event alert, in the case that there is no
## mailserver available. In the case that you want to keep the events for
## later delivery retry, you can use the EVENTQUEUE statement. The base
## directory where undelivered events will be stored is specified by the
## BASEDIR option. You can limit the maximal queue size using the SLOTS
## option (if omited then the queue is limited just by the backend filesystem).
#
# set eventqueue
# basedir /var/monit # set the base directory where events will be stored
# slots 100 # optionaly limit the queue size
#
#
## Monit by default uses the following alert mail format:
##
## --8<--
## From: address@hidden # sender
## Subject: monit alert -- $EVENT $SERVICE # subject
##
## $EVENT Service $SERVICE #
## #
## Date: $DATE #
## Action: $ACTION #
## Host: $HOST # body
## Description: $DESCRIPTION #
## #
## Your faithful employee, #
## monit #
## --8<--
##
## You can override the alert message format or its parts such as subject
## or sender using the MAIL-FORMAT statement. Macros such as $DATE, etc.
## are expanded on runtime. For example to override the sender:
#
subject: $SERVICE $EVENT at $DATE
message: Monit $ACTION $SERVICE at $DATE on $HOST: $DESCRIPTION.
}
#
#
## You can set the alert recipients here, which will receive the alert for
## each service. The event alerts may be restricted using the list.
#
set alert address@hidden # receive all alerts
# set alert
address@hidden only on { timeout }
# receive just service-
# # timeout alert
#
#
## Monit has an embedded webserver, which can be used to view the
## configuration, actual services parameters or manage the services using the
## web interface.
#
#set httpd port 2812 and
#use address 10.0.1.103
#allow 10.0.1.103
SET HTTPD PORT 2812 and
allow localhost
#only accept connection from localhost
# allow localhost # allow localhost to connect to the server and
# allow admin:monit # require user 'admin' with password 'monit'
#
#
###############################################################################
## Services
###############################################################################
##
## Check the general system resources such as load average, cpu and memory
## usage. Each rule specifies the tested resource, the limit and the action
## which will be performed in the case that the test failed.
#
# check system myhost.mydomain.tld
# if loadavg (1min) > 4 then alert
# if loadavg (5min) > 2 then alert
# if memory usage > 75% then alert
# if cpu usage (user) > 70% then alert
# if cpu usage (system) > 30% then alert
# if cpu usage (wait) > 20% then alert
#
#
## Check a file for existence, checksum, permissions, uid and gid. In addition
## to the recipients in the global section, customized alert will be send to
## the additional recipient. The service may be grouped using the GROUP option.
#
# check file apache_bin with path /usr/local/apache/bin/httpd
# if failed checksum and
# expect the sum 8f7f419955cefa0b33a2ba316cba3659 then unmonitor
# if failed permission 755 then unmonitor
# if failed uid root then unmonitor
# if failed gid root then unmonitor
# checksum, permission, uid, gid, unmonitor
# } with the mail-format { subject: Alarm! }
# group server
#
#
## Check that a process is running, responding on the HTTP and HTTPS request,
## check its resource usage such as cpu and memory, number of childrens.
## In the case that the process is not running, monit will restart it by
## default. In the case that the service was restarted very often and the
## problem remains, it is possible to disable the monitoring using the
## TIMEOUT statement. The service depends on another service (apache_bin) which
## is defined in the monit control file as well.
#
# check process apache with pidfile /usr/local/apache/logs/httpd.pid
# start program = "/etc/init.d/httpd start"
# stop program = "/etc/init.d/httpd stop"
# if cpu > 60% for 2 cycles then alert
# if cpu > 80% for 5 cycles then restart
# if totalmem > 200.0 MB for 5 cycles then restart
# if children > 250 then restart
# if loadavg(5min) greater than 10 for 8 cycles then stop
# and request "/monit/doc/next.php"
# then restart
# if failed port 443 type tcpssl protocol http
# with timeout 15 seconds
# then restart
# if 3 restarts within 5 cycles then timeout
# depends on apache_bin
# group server
#
check process sshd with pidfile /var/run/sshd.pid
start program "/etc/init.d/ssh start"
stop program "/etc/init.d/ssh stop"
if failed port 22 protocol ssh then restart
if 5 restarts within 5 cycles then timeout
check process mysql with pidfile /var/run/mysqld/mysqld.pid
group database
start program = "/etc/init.d/mysql start"
stop program = "/etc/init.d/mysql stop"
if failed host 10.0.1.103 port 3306 then restart
if 5 restarts within 5 cycles then timeout
check process apache with pidfile /var/run/apache2.pid
group www-data
start program = "/etc/init.d/apache2 start"
stop program = "/etc/init.d/apache2 stop"
if failed host 10.0.1.103 port 80 protocol http
and request "/monit/token" then restart
if cpu is greater than 60% for 2 cycles then alert
if cpu > 80% for 5 cycles then restart
if totalmem > 500 MB for 5 cycles then restart
if children > 250 then restart
if loadavg(5min) greater than 10 for 8 cycles then stop
if 3 restarts within 5 cycles then timeout
## Check the device permissions, uid, gid, space and inode usage. Other
## services such as databases may depend on this resource and automatical
## graceful stop may be cascaded to them before the filesystem will become
## full and the data will be lost.
#
# check device datafs with path /dev/sdb1
# start program = "/bin/mount /data"
# stop program = "/bin/umount /data"
# if failed permission 660 then unmonitor
# if failed uid root then unmonitor
# if failed gid disk then unmonitor
# if space usage > 80% for 5 times within 15 cycles then alert
# if space usage > 99% then stop
# if inode usage > 30000 then alert
# if inode usage > 99% then stop
# group server
#
#
## Check a file's timestamp: when it becomes older then 15 minutes, the
## file is not updated and something is wrong. In the case that the size
## of the file exceeded given limit, perform the script.
#
# check file database with path /data/mydatabase.db
# if failed permission 700 then alert
# if failed uid data then alert
# if failed gid data then alert
# if timestamp > 15 minutes then alert
# if size > 100 MB then exec "/my/cleanup/script"
#
#
## Check the directory permission, uid and gid. An event is triggered
## if the directory does not belong to the user with the uid 0 and
## the gid 0. In the addition the permissions have to match the octal
## description of 755 (see chmod(1)).
#
# check directory bin with path /bin
# if failed permission 755 then unmonitor
# if failed uid 0 then unmonitor
# if failed gid 0 then unmonitor
#
#
## Check the remote host network services availability and the response
## content. One of three pings, a successfull connection to a port and
## application level network check is performed.
#
# check host myserver with address 192.168.1.1
# if failed icmp type echo count 3 with timeout 3 seconds then alert
# if failed port 3306 protocol mysql with timeout 15 seconds then alert
# if failed url
# and content == 'action=""'
# then alert
#
#
###############################################################################
## Includes
###############################################################################
##
## It is possible to include the configuration or its parts from other files or
## directories.
#
# include /etc/monit.d/*
#
#
Villem Alari
mobiil: +37253939163
--
To unsubscribe: