[monit] Re: started twice

[Martin Pala]

Can you run monit in verbose mode (-v option) and provide logs?

Which monit version is it?

Thanks,
Martin

Nick Upson wrote:
> I have monitoring a process called bs1, yesterday I had a problem
> which I traced back to having 2 copies running at the same time (as it
> talks down a serial line that caused problems).
>
> The monit log shows it starting one copy at 16:58 and starting it
> again at 17:00.
> Normally monit looks after everything fine on this system which has
> been used for several weeks, the config entry is below
>
>     check process bs1 with pidfile "/var/run/bs1.pid"
>     start program = "/opt/unb/bin/bs.sh 1 restart"
>     stop program = "/opt/unb/bin/bs.sh 1 stop"
>     if totalmem > 1000 Mb then
>        exec "/bin/bash -c '/bin/echo bs1: memory alert >>
> /tmp/monit;/opt/unb/bin/dblog_put.sh monit /tmp/monit'"
>     if cpu usage > 95% for 3 cycles then
>        exec "/bin/bash -c '/bin/echo bs1: cpu usage alert >>
> /tmp/monit;/opt/unb/bin/dblog_put.sh monit /tmp/monit'"
>
>
> --
> To unsubscribe:
> http://lists.nongnu.org/mailman/listinfo/monit-general