Re: [lwip-users] Socket API send command packaging up data

[Mike Danby]

When the test program is run for the first 3-5 seconds the each send call will 
result is the string (approx. 15 bytes) being transmitted to the client in 
separate frames. After that (even though the calls to send continue at a rate 
of 1Hz) the strings start to get packaged up into single frames. The number of 
strings in the packaged frames grows on a few iterations to be around 20 -25 
(frames around 300 bytes).

I also see  the server respond to ARP requests, however the frame is 1514 
bytes.  The data in the ARP request is correct but Wireshark notes the 
"Ethernet Frame Check Sequence Incorrect", I assume (probably incorrectly) 
because the frame size incorrect even though data is good.

-----Original Message-----
From: lwip-users <address@hidden> On Behalf Of Sergio R. Caprile
Sent: 31 July 2018 16:38
To: address@hidden
Subject: Re: [lwip-users] Socket API send command packaging up data

Completely missed the "20 second" part.
You don't remember wrong, and you know it ;^)

_______________________________________________
lwip-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/lwip-users