Re: [lwip-users] setting up multiple UDP connections with same prio and different data to send

[Noam Weissman]

Hi,

I have remembered that on WIN7 broadcast is not working.

Check these links:
   
http://www.hypack.com/new/portals/1/pdf/sb/01_12/udpbroadcastonmachineswmultiplenetworkinterfaces.pdf

   https://github.com/dechamps/WinIPBroadcast


If you cannot broadcast and cannot use IGMP you have a problem. This sounds a 
bit strange as far as I know all streaming 
app's use multicast so this is a bit strange.

BR,
Noam.

-----Original Message-----
From: lwip-users [mailto:address@hidden On Behalf Of mgirke
Sent: Thursday, November 10, 2016 1:06 PM
To: address@hidden
Subject: Re: [lwip-users] setting up multiple UDP connections with same prio 
and different data to send

I wish you were right but it doesn´t help.

I defined WLAN subnet mask to 255.255.0.0 but no packages arrive. Setting the 
ethernet subnet mask to 255.255.0.0 doesn´t work of course because WLAN and ETH 
have to be seperated.

I tested sending to remote ip 192.168.255.255 and 192.168.10.255.

I am using android tablets as receivers. Can they detect "broadcast"?



--
View this message in context: 
http://lwip.100.n7.nabble.com/setting-up-multiple-UDP-connections-with-same-prio-and-different-data-to-send-tp27709p27749.html
Sent from the lwip-users mailing list archive at Nabble.com.

_______________________________________________
lwip-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/lwip-users