[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [lwip-users] lwip not working with Linksys switch?
From: |
Simon Goldschmidt |
Subject: |
Re: [lwip-users] lwip not working with Linksys switch? |
Date: |
Thu, 15 Mar 2012 11:28:27 +0100 |
twenty <address@hidden> wrote:
> I implemented lwip in ADI BF527 DSP on a customized board. The Ethernet
> communication is fine between the board and the PC. However, if i connect
> the board and pc via a linksys switch, there is no communication at all. I
> am sure there is no physical connection problem. i suspect it might be
> related to lwip stack as the old platform which used KwikNet TCP/IP Stack
> from Kadak didn't have this issue. Do you guys have any idea on that?
> Thanks.
Maybe the switch uses VLANs? If so, try setting ETHARP_SUPPORT_VLAN to 1 in
lwipopts.h (included since lwIP 1.3.2) to allow VLAN headers (the VLAN id is
not checked without defining ETHARP_VLAN_CHECK or ETHARP_VLAN_CHECK_FN()
accordingly - see comment in opt.h).
Simon
--
NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone!
Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a