[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[lwip-users] initialisation of lwIP
From: |
franz keuner |
Subject: |
[lwip-users] initialisation of lwIP |
Date: |
Wed, 22 Dec 2004 12:18:22 +0100 (MET) |
Hello,
unfortunately I don't think that the reason is the MEM_ALIGNMENT value. I
use a 16-bit controller (CS167 infineon).
I define the following values in my lwipopts.h:
#define MEM_ALIGNMENT 2U
#define MEM_SIZE 2000U
#define MEMP_NUM_PBUF 8U
#define MEMP_NUM_UDP_PCB 4U
#define MEMP_NUM_TCP_PCB 8U
#define MEMP_NUM_TCP_PCB_LISTEN 8U
#define MEMP_NUM_TCP_SEG 16U
#define MEMP_NUM_NETBUF 8U
#define MEMP_NUM_NETCONN 8U
#define MEMP_NUM_API_MSG 0U
#define MEMP_NUM_TCPIP_MSG 8U
#define MEMP_NUM_SYS_TIMEOUT 2U
/* ---------- Pbuf options ---------- */
#define PBUF_POOL_SIZE 24U
#define PBUF_POOL_BUFSIZE 500U //LW: was 128, but we want single pbufs
#define PBUF_LINK_HLEN 16U
Can it be that I defined in another file a value that can have the result I
described?
Or did I configure some settings in the Tasking EDE in a wrong way? (I used
the values which were described in the user manual. Would there be a
"greater" problem if this settings were wrong?)
I tried a lot of different values for the defined values but none of them
was successful.
Thanks again and regards,
Franz
--
Psssst! Mit GMX Handyrechnung senken: http://www.gmx.net/de/go/mail
100 FreeSMS/Monat (GMX TopMail), 50 (GMX ProMail), 10 (GMX FreeMail)